Product Segments • Care Motion • Industrial Motion TiMOTION's TA23 series is a compact linear actuator primarily used for medical applications that require high force and high speed. This linear actuator also has the ability to save installation space by mounting the control box to the actuator. The TA23 linear actuator is available with IP rating up to IP66W. It also has Hall sensors for position feedback. The TA23 also has manual release option which can be used for patient hoist applications. General Features Max. speed at max. load Max. speed at no load Retracted length IP rating Certificate Output signals Options Voltage Color Operational temperature range Manual release (for patient hoist) 12/24/36V DC; 24V DC (PTC) Black, grey +5°C~+45°C Suitable for patient hoist application

Standard Dimensions

Push Pull Self Locking Force (N) Typical Current (A) No Load With Load No Load With Load Motor Speed (2600RPM, Duty Cycle 10%) Motor Speed (3400RPM, Duty Cycle 10%) Motor Speed (3800RPM, Duty Cycle 10%) 1 Please refer to the approved drawing for the final authentic value. 2 The current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately twice the current measured in 24V DC; speed will be similar for both voltages. 3 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control...

Performance Data (24V DC Motor) Motor Speed (2600RPM, Duty Cycle 10%)

Performance Data (24V DC Motor) Motor Speed (3400RPM, Duty Cycle 10%)

Motor Speed (3800RPM, Duty Cycle 10%) Speed vs. Load 25.0 Current vs. Load 10.0 9.0 8.0 7.0 6.0 Current (A) Performance Data (24V DC Motor)

Load and Speed See page 3 Retracted Length (mm) See page 9 2 = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 10.2 3 = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 12.2 C = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 10.2, with plastic T-bushing 1 = Punched hole on inner tube + plastic cap, without slot, hole 10.2, with plastic bushing 2 = Punched hole on inner tube + plastic cap, without slot, 3 = Plastic, U clevis, slot 8.2, depth 20.0, hole 10.2 (for load 4 = Plastic, U clevis, slot 8.2, depth 20.0, hole 12.2 (for load 5 = Punched hole on inner tube, without slot,...

TA23 Patient Hoist Ordering Key TA23 Rear Attachment (mm) See page 10 C = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 10.2, with T-bushing Front Attachment (mm) See page 10-11 F = Aluminum casting, U clevis, slot 8.2, depth 19.0, hole 10.2, with T-bushing, manual release I = Aluminum casting, U clevis, slot 8.2, depth 39.0, hole 10.2, with plastic T-bushing, for manual release G = Aluminum casting, U clevis, slot 8.2, depth 19.0, hole 10.2, with plastic T-bushing, Without press down for manual release Direction of Rear Attachment (Counterclockwise) See page 11 Special Functions for...

qo t moTion Retracted Length (mm) 2. Retracted length needs to > Stroke+Y Front Attach. Rear Attach. Front Attach. Spindle Function General For Patient Hoist 0, 1 2, 3 F, G (For Patient Hoist) - +250 F, G (For Patient Hoist) - - I (For Patient Hoist) - +270 I (For Patient Hoist) - - C. Load = 5000(N)/6000(N)/8000(N) Front Attach. Spindle Function Front Attach. Spindle Function

C = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 10.2, with plastic T-bushing TA23 Ordering Key AppendixRear Attachment (mm) 2 = Aluminum casting, U clevis, slot 3 = Aluminum casting, U clevis, slot Front Attachment (mm) 1 = Punched hole on inner tube + plastic cap, without slot, hole 10.2, with plastic bushing 2 = Punched hole on inner tube + plastic cap, without slot, hole 12.2 3 = Plastic, U clevis, slot 8.2, depth 20.0, hole 10.2 (for load push < 4000N & pull < 2500N) 4 = Plastic, U clevis, slot 8.2, depth 20.0, hole 12.2 (for load push < 4000N & pull < 2500N) 7 = Aluminum casting,...

TA23 Ordering Key AppendixFront Attachment (mm) I = Aluminum casting, U clevis, slot 8.2, depth 39.0, hole 10.2, with plastic T-bushing, for manual release Direction of Rear Attachment (Counterclockwise) 1 = 0° 3 = 90° Functions for Limit Switches Wire Definitions CODE Pin • 1 (Green) 2 (Red) O 3 (White) 4 (Black) 5 (Yellow) A (Blue) 1 extend (VDC+) N/A N/A N/A retract (VDC+) N/A 2 extend (VDC+) N/A middle switch pin B middle switch pin A retract (VDC+) N/A 3 extend (VDC+) common upper limit switch N/A retract (VDC+) lower limit switch 4 extend (VDC+) common upper limit switch medium limit switch...

TA23 Ordering Key AppendixConnector 1 = DIN 6P, 90° plug 2 = Tinned leads 4 = Big 01P, plug D = Extension cable, not preset on motor cover (cable legth 120mm) R = Extension cable, preset on motor cover (cable legth 50mm) Cable Length for Direct Cut System (mm) P = Molex 8P, 90° plug, without anti-clip M = DIN 4P, dental chair plug (40510143, standard) N = DIN 4P, dental chair plug (40510040) Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice.