Product Segments • Comfort Motion TiMOTION's TA14 linear actuator is designed for lift applications like recliners, lifting chairs and movie theater seating. This linear actuator is designed to function as a direct cut system, eliminating the need for a control box, offering a simple and economical alternative. Options for the TA14 include a safety nut and multiple mounting styles for the front attachment. General Features Max. load Retracted length Black, dark grey Operational temperature range at full performance For direct-cut system: Can function without control box

Standard Dimensions Retracted Length

Load and Speed code Load (N) Push Pull Self Locking Force (N) Typical Current (A) No Load With Load No Load With Load Motor Speed (2600RPM, Duty Cycle 10%) Motor Speed (3400RPM, Duty Cycle 10%) L 6000 4000 Motor Speed (3800RPM, Duty Cycle 10%) U 5000 4000 1 Please refer to the approved drawing for the final authentic value. 2 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in. 3 The current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately...

Performance Data (24V DC Motor) Motor Speed (2600RPM, Duty Cycle 10%)

Motor Speed (3400RPM, Duty Cycle 10%) Speed vs. Load 40.0 35.0 30.0 Performance Data (24V DC Motor)

Performance Data (24V DC Motor) Motor Speed (3800RPM, Duty Cycle 10%)

Stroke (mm) See page 3 Retracted Length See page 8 (mm) Rear Attachment 1 = Plastic, U clevis, slot 6.1, depth 17.0, hole 10.2 Front Attachment 1 = Punched hole on inner tube + plastic cap, without (mm) slot, hole 10.2, plastic bush See page 9 2 = Punched hole on inner tube + plastic cap, without 3 = Plastic, U clevis, slot 8.2, depth 20.2, hole 10.2, for load push < 4000N & pull < 2500N 4 = Plastic, U clevis, slot 8.2, depth 20.2, hole 12.2, for load push < 4000N & pull < 2500N 5 = Punched hole on inner tube, without slot, hole 10.2, plastic bush Color (Gear box) 1 = Black 5 = Dark grey 6 =...

qo t moTion Retracted Length (mm) 2. Retracted length needs to > Stroke+Y

TA14 Ordering Key Appendix Rear Attachment (mm) 1 = Plastic, U clevis, slot 6.1, depth 17.0, hole 10.2 ø10.2 4 = Plastic, U clevis, slot 8.2, depth 20.2, hole 12.2, for load push < 4000N & pull < 2500N 8 = Aluminum casting, U clevis, slot 6.2, depth 17.0, hole 12.2 ø26 7 = Aluminum casting, U clevis, slot 6.2, depth 17.0, hole 10.2 6 = Punched hole on inner tube, without slot, hole 12.2 ø26 5 = Punched hole on inner tube, without slot, hole 10.2, plastic bush 3 = Plastic, U clevis, slot 8.2, depth 20.2, hole 10.2, for load push < 4000N & pull < 2500N 2 = Punched hole on inner tube + plastic cap,...

TA14 Ordering Key Appendix Connector 1 = Direct cut operation with single actuator Short DIN 5P, socket 2=D irect cut operation with 2 actuators Small 01P, plug P = Molex 8P, 90° plug, without anti-clip Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice.