Product Segments • Care Motion TiMOTION's TA13 series linear actuator is designed primarily for dental chairs requiring high-push load solutions, but can also be applied to a wide range of other medical applications. The TA13 supports load ratings up to 10000N. Its speed is up to 32.2mm/s even under the load of 1500N. Certificates for the TA13 include IEC60601-1 and ES60601-1. General Features Hall sensors, Reed sensor Push only Black, grey Max. speed at max. load Max. speed at no load Retracted length Certificate Stroke Output signals Options Voltage Color Operational temperature range at full performance Suitable for dentist chair application

Standard Dimensions (mm) Load and Speed CODE Load (N) Push Pull Self Locking Force (N) No Load With Load No Load With Load Motor Speed (3000RPM, Duty Cycle 10%) Motor Speed (3800RPM, Duty Cycle 10%) 1 Please refer to the approved drawing for the final authentic value. 2 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in. 3 The current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately twice the current measured in 24V DC. With a 36V...

Performance Data (24V DC Motor) Motor Speed (3000RPM, Duty Cycle 10%)

Motor Speed (3800RPM, Duty Cycle 10%) Speed vs. Load 50.0 Performance Data (24V DC Motor)

Voltage 5 = 24V DC, PTC or thermal protector 7 = 36V DC, PTC or thermal protector Load and Speed See page 2 Retracted Length (mm) See page 6 Direction of Rear Attachment (Counterclockwise) Quick Release 1 = Iron CNC, U clevis, slot 8.2, depth 17, hole 10.2, with plastic T-bushing 2 = Iron CNC, U clevis, slot 8.2, depth 17, hole 12.2 1 = Iron CNC, U clevis, slot 8.2, depth 17, hole 10.2, with plastic T-bushing 2 = Iron CNC, U clevis, slot 8.2, depth 17, hole 12.2 3 = Iron CNC, U clevis, slot 10.2, depth 17, hole 10.2, with plastic T-bushing 4 = Iron CNC, U clevis, slot 10.2, depth 17, hole 12.2...

TA13 Ordering Key Appendix Retracted Length (mm) 2. Retracted length needs to > Stroke+Y

TA13 Ordering Key Appendix Rear Attachment (mm) 4 = Iron CNC, U clevis, slot 10.2, depth 17, hole 12.2 3 = Iron CNC, U clevis, slot 10.2, depth 17, hole 10.2, with plastic T-bushing 2 = Iron CNC, U clevis, slot 8.2, depth 17, hole 12.2 1 = Iron CNC, U clevis, slot 8.2, depth 17, hole 10.2, with plastic T-bushing J = Aluminum casting, without slot, hole 10.2, for dental chair ø26 C = Punched hole on inner tube + plastic cap, width 32, without slot, hole 12.2 B = Punched hole on inner tube + plastic cap, width 32, without slot, hole 10.2 ø26 4 = Iron CNC, U clevis, slot 10.2, depth 17, hole 12.2...

TA13 Ordering Key AppendixDirection of Rear Attachment (Counterclockwise) 1 = 0° 3 = 90° Functions for Limit Switches Wire Definitions CODE Pin • 1 (Green) 2 (Red) O 3 (White) 4 (Black) 5 (Yellow) A (Blue) 1 extend (VDC+) N/A N/A N/A retract (VDC+) N/A 2 extend (VDC+) N/A middle switch pin B middle switch pin A retract (VDC+) N/A 3 extend (VDC+) common upper limit switch N/A retract (VDC+) lower limit switch 4 extend (VDC+) common upper limit switch medium limit switch retract (VDC+) lower limit switch 1 = DIN 6P, 90° plug 2 = Tinned leads M = DIN 4P, dental chair plug (40510-143, standard) N...