Product Segments • Care Motion TiMOTION's TA11 series linear actuator is one of our compact medical actuators, suitable for various healthcare applications. Its compact design supports load ratings up to 1500N. TA11 is recommended to be used in bathroom chair applications. General Features 1,500N (push/pull) 10.5mm/s 13.1mm/s > Stroke + 155mm IP66W 20~700mm Hall sensors 12/24V DC Grey Max. speed at max. load Max. speed at no load Retracted length IP rating Stroke Output signals

Drawing Standard Dimensions (mm) Load and Speed CODE Load (N) Typical Current (A) Typical Speed (mm/s) Push Pull No Load With Load No Load With Load 1 Please refer to the approved drawing for the final authentic value. 2 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in. 3 Operational temperature range at full performance: +5°C~+45°C 4 The current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately twice the current measured in 24V DC;...

Performance Data (24V DC Motor)

Load and Speed See page 2 Retracted Length See page 5 (mm) Rear Attachment 1 = U casting clevis, slot 6, hole 6.4 (mm) 2 = U casting clevis, slot 6, hole 8 Front Attachment 1 = Casting, width 21.9, slot 6.1, hole 12.2 Rear Attachment (Counterclockwise) 3 = U casting clevis, slot 6, hole 10 Special Functions 0 = Without (Standard) 1 = Safety nut Output Signal 0 = Without 2 = Hall sensor * 2 Plug 1 = DIN 6P, 90° plug 2 = Tinned leads Cable Length (mm) 0 = Straight, 100 3 = Straight, 1000 For Pull / Push T = Push only application P = Pull only application

TA11 Ordering Key Appendix Retracted Length (mm) 2. Retracted length needs to > Stroke+Y

TA11 Ordering Key Appendix Rear Attachment (mm) 2 = U casting clevis, slot 6, hole 8 3 = U casting clevis, slot 6, hole 10 1 = U casting clevis, slot 6, hole 6.4 1 = Casting, width 21.9, slot 6.1, hole 12.2 Direction of Rear Attachment (Counterclockwise) 1 = 0°

TA11 Ordering Key Appendix Plug 1 = DIN 6P, 90° plug Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice.