Product Segments • Industrial Motion TiMOTION’s SR1 series is a low-noise industrial linear actuator specifically designed for applications requiring a resilient and quiet solution. Constructed with plastic helical gearing and a sturdy metal housing, the SR1 has a noise level lower than 58 dBA. Available with an optional IP rating of up to IP69K (static), suppressed noise and robust quality, it’s capable of working in almost any environment. Compact, silent, and weather-resistant, the SR1 series is an ideal choice for light industrial use. General Features Max. load Retracted length Output signals Mechanical pot., NPN Hall sensor (5-36V input) * 2 Manual drive Operational temperature range Operational temperature range

Load and Speed (12V DC) CODE Load (N) Self Locking Force (N) Duty Typical Current (A) Typical Speed (mm/s) No Load With Load No Load With Load 24V DC 24V DC T-Smart Default OCP Value (A) Push Pull Self Locking Force (N) Duty Typical Current (A) Typical Speed (mm/s) No Load With Load No Load With Load T-Smart Default OCP Value (A) 1 Please refer to the approved drawing for the final authentic value. 2 The current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately twice the current measured in 24V DC; speed will be similar for both voltages. 3 The current...

Motor Speed (4800RPM) Speed vs. Load 10.0 Performance Data (12V DC Motor)

Motor Speed (4800RPM) Speed vs. Load 7.6 Performance Data (24V DC Motor)

Manual Drive 0 = Without 1 = With Stroke (mm)Retracted Length (mm) See page 2 Rear Attachment (mm) See page 7 Direction of Rear Attachment (Counterclockwise) Special Function of Spindle Subassembly Function of Limit Switches Output Signal IP Rating 1 = Aluminum, U clevis, slot 8.2, depth 12.2, hole 10.2 3 = Aluminum, U clevis, slot 8.2, depth 12.2, hole 12.8 2 = Aluminum, U clevis, slot 8.2, depth 12.2, hole 12.2 1 = Aluminum, slotless, hole 10.2 2 = Aluminum, slotless, hole 12.2 3 = Aluminum, slotless, hole 12.8 4 = Aluminum, U clevis, slot 8.2, depth 12.2, hole 10.2 5 = Aluminum, U clevis,...

qo t moTion Retracted Length (mm) 2. Retracted length needs to > Stroke+Y 3. Retracted length needs to > 230mm A. Front Attach. Load & Speed Type(N)

SR1 Ordering Key Appendix Rear Attachment (mm) 2 = Aluminum, U clevis, slot 8.2, depth 12.2, hole 12.2 3 = Aluminum, U clevis, slot 8.2, depth 12.2, hole 12.8 1 = Aluminum, U clevis, slot 8.2, depth 12.2, hole 10.2 Front Attachment (mm) 2 = Aluminum, slotless, hole 12.2 ø12.2 6 = Aluminum, U clevis, slot 8.2, depth 12.2, hole 12.8 5 = Aluminum, U clevis, slot 8.2, depth 12.2, hole 12.2 4 = Aluminum, U clevis, slot 8.2, depth 12.2, hole 10.2 3 = Aluminum, slotless, hole 12.8

SR1 Ordering Key Appendix Direction of Rear Attachment (Counterclockwise) 1 = 0° Connector (mm) 01 = Tinned leads, core wire 50, stripped wire 10

qo t moTion Wire Definition N_Normal Port Function of Wire Color AWG Number Limit Switches Two limit switches cut off the actuator at end of stroke Two limit switches cut off the actuator at end of stroke + third one in between sends signal Two limit switches send signal at end of stroke Position Feedback0. Without 1. Mechanical Pot. 5, N. Hall sensor*2 EXT+ EXT+ EXT+ RET+ RET+ RET+ - POT-out Vcc+ EXT+ EXT+ EXT+ RET+ RET+ RET+ EXT+ EXT+ EXT+ RET+ RET+ RET+ - POT-GND Hall-GND - POT-Vout EOS-extended Terms of Use The user is responsible for determining the suitability of TiMOTION products for a...