MA4
8Pages

Product Segments • Industrial Motion TiMOTION’s MA4 series electric linear actuator was specifically designed for heavy-duty applications and harsh working environments that require durability. Applications suitable for the MA4 include agricultural equipment such as fertilizer, seed spreader, harvesters, grain handlers, combines, tractors…etc. Also, commercial and industrial applications include commercial lawn mowers, scrubbers, sweepers, and material handling equipment. Furthermore, the MA4 has an optional T-Smart (note 1) version, which can work with the PGMA (note 2) to achieve the following functionality: - Set up the actuator’s stroke and speed - Multiple signal feedbacks support - Monitor real-time actuator status - Up to 8 actuator synchronization - Built-in safety mechanism - Customized service for BUS required applications (note 3) Note 1: T iMOTION develops T-Smart functionality. With T-Smart, the actuator has a built-in circuit board with a microprocessor that can operate the actuator without a control box. Note 2: P GMA is a software program developed by TiMOTION. Users can install this programmer into the laptop and adjust the actuator parameters directly. Note 3: Please contact your local sales department for further assistance. General Features Max. load Retracted length ≥ 215mm (depending on chosen options) Stroke 25~1000mm Output Signals Adjustable reed switch, mechanical POT, Hall sensor(s) Operational temperature range Operational temperature range

Load and Speed CODE Self Locking Force (N) Motor Speed (6000RPM, Duty Cycle 25%) A Note 1  Please refer to the approved drawing for the final authentic value. 2  The current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately twice the current measured in 24V DC. With a 36V DC motor, the current is approximately two-thirds the current measured in 24V DC. With a 48V DC motor, the current is approximately half the current measured in 24V DC. Speed will be similar for all the voltages. 3  The current & speed in table are tested when the actuator is...

Motor Speed (6000RPM) Speed vs. Load 60.0 Performance Data (24V DC Motor)

Load & Speed Rear Attachment (mm) See page 6 1 = Aluminum, slotless, hole 6.4 2 = Aluminum, slotless, hole 8.0 3 = Aluminum, slotless, hole 10.0 4 = Aluminum, U clevis, slot 6.1, depth 10.5, hole 6.4 5 = Aluminum, U clevis, slot 6.1, depth 10.5, hole 8.0 6 = Aluminum, U clevis, slot 6.1, depth 10.5, hole 10.0 Front Attachment (mm) See page 6 1 = Aluminum, slotless, hole 6.4 2 = Aluminum, slotless, hole 8.0 3 = Aluminum, slotless, hole 10.0 4 = Aluminum, U clevis, slot 6.1, depth 16.0, hole 6.4 5 = Aluminum, U clevis, slot 6.1, depth 16.0, hole 8.0 6 = Aluminum, U clevis, slot 6.1, depth...

MA4 Ordering Key Appendix Retracted Length (mm) 1. If stroke ≤ 108mm, minimum retracted length refer 2. If Stroke ≥ 109mm, Calculate A+B+C=Y 3. Minimum retracted length is Stroke+Y Front Attach. Load & Speed Type (N) A, B, C, D, E

MA4 Ordering Key Appendix Rear Attachment (mm) 1 = Aluminum, slotless, hole 6.4 2 = Aluminum, slotless, hole 8.0 3 = Aluminum, slotless, hole 10.0 4 = luminum, U clevis, slot 6.1, A depth 10.5, hole 6.4 ø6.4 5 = luminum, U clevis, slot 6.1, A depth 10.5, hole 8.0 6 = Aluminum, U clevis, slot 6.1, Front Attachment (mm) 1 = Aluminum, slotless, hole 6.4 2 = Aluminum, slotless, hole 8.0 3 = Aluminum, slotless, hole 10.0 4 = luminum, U clevis, slot 6.1, A depth 16.0, hole 6.4 ø6.4 5 = luminum, U clevis, slot 6.1, A depth 16.0, hole 8.0 6 = luminum, U clevis, slot 6.1, A depth 16.0, hole 10.0 ø10

MA4 Ordering Key Appendix Installation Direction (Counter-Clockwise) 1 = 0° P1 Connecter G = Tinned leads

MA4 Ordering Key Appendix Output Signals Wire Gauge Output Signal Code (AWG) 0. Without 1. POT Wire Definitions without T-Smart Limit Switches Cut Off the Acutator Limit Switches Send Signal without T-Smart Wire Definitions Signal ground Blue T-Smart Molex 6p socket for TAD1 / Reed switch assembly Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice.