Product Segments • Industrial Motion TiMOTION's MA4 series is a compact electric linear actuator, designed to operate effectively in tight spaces. With a range of IP ratings and exceptional durability, the MA4 is a reliable and versatile solution for agricultural, industrial, and commercial applications. In addition, TiMOTION offers a smaller variant, the MA4-S. Under specific stroke conditions, its minimum retracted length is 70% shorter than standard MA4-N and MA4-T types, making it ideal for extremely limited spaces. For more information about T-Smart actuators, please click here. General Features Max. load Retracted length ≥ 215mm (depending on chosen options of MA4-N/-T) ≥ 152mm (depending on chosen options of MA4-S) Output signals Mechanical Pot., Hall sensor * 2 (5-36V input) Hall sensor * 2, signals to embedded PCBA (T-Smart dedicated option) Operational temperature range Operational temperature range at full performance Manual drive Protocol support: Advanced, SAE J1939, Modbus

Normal / T-Smart Dimensions T = 1+1: 1 * cable with cable gland (A1) + Molex 6P socket (P2) (mm)

Duty Cycle Load (N) Push Pull Self Locking Force(N) No Load With Load No Load With Load CODE Duty Cycle Load (N) Push Pull Self Locking Force (N) No Load With Load No Load With Load 1 Please refer to the approved drawing for the final authentic value. 2 The current & speed in table are tested with a stable power supply, under ambient temperature 20°C. 3 The current & speed in table are tested when the actuator is extending under push load. 4 With load, noise level < 80dBA (by TiMOTION test standard, ambient noise level < 36dBA). 5 Standard stroke: Min. 25 mm, Max. please refer to the table below....

Motor Speed (6000RPM, Duty Cycle 25%) Speed vs. Load 50.0 45.0 Performance Data (12V DC Motor)

Performance Data (24V DC Motor) Motor Speed (6000RPM, Duty Cycle 25%)

Type N = Normal T = T-Smart S = Small version, normal Load & Speed See page 2 Retracted Length (mm) See page 8 Direction of Rear Attachment (Counterclockwise) Function of Limit Switches 1 = Aluminum, slotless, hole 6.4 2 = Aluminum, slotless, hole 8.0 3 = Aluminum, slotless, hole 10.0 1 = Aluminum, slotless, hole 6.4 2 = Aluminum, slotless, hole 8.0 3 = Aluminum, slotless, hole 10.0 4 = Aluminum, U clevis, slot 6.1, depth 16.0, hole 6.4 5 = Aluminum, U clevis, slot 6.1, depth 16.0, hole 8.0 6 = Aluminum, U clevis, slot 6.1, depth 16.0, hole 10.0 7 = Stainless Steel 316L, U clevis, slot 6.1, depth...

Cable Exit T = 1+1: 1* cable with cable gland (A1) + Molex 6P socket (P2) 01 = Tinned leads, core wire 50, stripped wire 10 XXXX = Input 4 digital number directly, range 0-5000, multiples of 100 (e.g. 500, enter 0500) Vent Valve 0 = Sample packaging C = Standard package, US fumigated pallet (1219*1016) 1 = Standard package, EU fumigated pallet (1200*800) 2 = Standard package, EU fumigated pallet (1500*800) E = Standard package, US plywood pallet (1219*1016) 5 = Standard package, EU plywood pallet (1200*800) 6 = Standard package, EU plywood pallet (1500*800) M = Modbus A = Customized, proposal...

MA4 Ordering Key AppendixRetracted Length (mm) 1. If type N/T, stroke < 108 mm, minimum retracted length=Y ; stroke > 109 mm, minimum retracted length=stroke +Y; calculate Y=A+B + C (refer to Tables A, B, and C). 2. If type N/T, stroke < 50 mm, minimum retracted length=Y ; stroke > 51 mm, minimum retracted length=stroke +Y; calculate Y=A+B+C (refer to Tables A, B, and C). * I f stroke > 108 mm , minimum retracted length of type N/T & type S/P will be 5mm different. Front Type: N/T Type: S/P Output Signal Stroke (mm) Load & Speed Type (N) * The min. RL is the same across the range of strokes.

MA4 Ordering Key Appendix Rear Attachment (mm) 1 = Aluminum, slotless, hole 6.4 2 = Aluminum, slotless, hole 8.0 3 = Aluminum, slotless, hole 10.0 4 = Aluminum, U clevis, slot 6.1, depth 10.5, hole 6.4 ø6.4 5 = Aluminum, U clevis, slot 6.1, depth 10.5, hole 8.0 6 = Aluminum, U clevis, slot 6.1, depth 10.5, hole 10.0 Front Attachment (mm) 1 = Aluminum, slotless, hole 6.4 2 = Aluminum, slotless, hole 8.0 3 = Aluminum, slotless, hole 10.0 4 = Aluminum, U clevis, slot 6.1, depth 16.0, hole 6.4 ø6.4 7 = Stainless Steel 316L, U clevis, slot 6.1, depth 16.0, hole 6.4 8 = Stainless Steel 316L, U clevis,...

MA4 Ordering Key Appendix Front Attachment (mm) B = Aluminum, U clevis, slot 6.1, depth 13.0, hole 6.4 ø6.4 D = Aluminum, U clevis, slot 6.1, depth 13.0, hole 10.0 C = Aluminum, U clevis, slot 6.1, depth 13.0, hole 8.0 9 = Stainless Steel 316L, U clevis, slot 6.1, depth 16.0, hole 10.0 Direction of Rear Attachment (Counterclockwise) 1 = 0° Connector (mm) 01 = Tinned leads, core wire 50, stripped wire 1

qo t moTion Wire Definition Port Function of Wire Color Number Limit Switches Two limit switches cut off the actuator at EOS + third one in between sends signal Two limit switches . send signal at end of stroke RD Two limit switches „ send signal at end of stroke + third • rd one in-between sends signal^^H®iWH Output Signal 0. Without LS-COM LS-Upper POT-GND LS-Lower POT-Vin (+5V) EOS-COM LS-Upper 3rd LS pin1 LS-Lower POT-Vin (+5V) 5. Hall sensor * 2 EXT+ LS-Upper 3rd LS pin1 LS-Lower LS-COM

qo t moTion Wire Definition Port Function of Wire Color Wire Gauge Output Signal Number Limit Switches (AWG) actuator and send • RD signal at EOS LS-Upper LS-Lower POT-Vout POT-Vin (5V) without P2 / Rubber seal plug

qo t moTion Wire Definition Type: #S, Small version, normal Port Function of Wire Color Number Limit Switches Two limit switches cut off the actuator at EOS + third one in between sends signal Two limit switches . send signal at end of stroke RD send signal at end of stroke + third one in-between sends signal Output Signal 0. Without 5. Hall sensor * 2 EXT+

MA4 Ordering Key Appendix Wire Definition Type: #S, Small version, normal Port Function of Wire Color Number Limit Switches actuator and send • RD signal at EOS Output Signal 0. Without P2 Wire Color Wire Gauge Alternative • RD 20 VDC+ VDC+ VDC+ VDC+ • BN 26 Ctrl - Extend Ctrl - Extend Ctrl - Extend Ctrl - Extend • GY 26 Ctrl - Retract Ctrl - Retract Ctrl - Retract Ctrl - Retract • OG 26 LS-Upper LS-Upper LS-Upper LS-Upper / Hall-Pot./ Hall A • VT 26 LS-Lower LS-Lower LS-Lower LS-Lower / PWM/ Hall B BiWH 26 Hall-Pot./ Hall A/ Commu. A Hall-Pot./ Hall A/ Commu. A Hall-Pot./ Hall A/ Commu. A Commu....