Product Segments • Industrial Motion TiMOTION's MA1 series linear actuator is the proven choice for applications requiring a durable, long life solution. Specifically designed for harsh working environments, the MA1 linear actuator is ideal for use in heavy-duty machinery, industrial equipment and off road vehicles. This linear actuator has been certified for applications requiring IP69K(static) compliance. Available options for the MA1 linear actuator include AC or DC power, ball or acme spindles, mechanical or electrical braking and a load limiting clutch or limit switches. General Features Max. load ACME screw: 8,000N (push/pull); Ball screw: 4,500N (push/pull) 5.7mm/s (ACME screw, DC motor); 31.2mm/s (ACME screw, DC motor); 14.8mm/s (Ball screw, DC motor) 59mm/s (Ball screw, DC motor) Retracted length ≥ Stroke + 160mm (ACME screw, without POT); ≥ Stroke + 201mm (Ball screw, without POT) 20~1000mm (ACME screw); 20~800mm (Ball screw) Output Signals Mechanical pot., Hall sensors*2 (5-36V input or PNP type) Overload clutch, motor brake, mechanical brake ACME or Ball screw Operational temperature range Operational temperature range at full performance Electromagnetic brake option Higher duty cycle (25%), corrosion proof Manual d

Retracted Length

Rated Load and Self-Lock Force Spindle type Load & Load (N) SpeedPush Pull Self Lock (N) Duty Cycle Overload Clutch Rated Current and Speed Spindle Load & type speed Load Load Load Load No With No With No With Load Load Load Load Load Load Load Load Motor Speed (4100RPM) Motor Speed (3600RPM) Motor Speed (2900RPM) 1 Please refer to the approved drawing for the final authentic value. 2 The self-locking force is a minimum value and can be actually higher. 3 The current & speed in table are tested when the actuator is extending under push load. 4 The current & speed in table are tested with 24V...

Motor Speed (4100RPM) Speed vs. Load 70.0 Performance Data (24V DC Motor)

Performance Data (115V AC Motor)

Performance Data (230V AC Motor)

Spindle Type A = ACME screw B = Ball screw Voltage Load and Speed 1 = 12V DC, thermal switch 3 = 36V DC, thermal switch 4 = 115V AC 60Hz 2 = 24V DC, thermal switch 9 = 48V DC, thermal switch 5 = 230V AC 50Hz Retracted Length (mm) See page 8 Rear Attachment (mm) See page 8 1 = #45 Steel CNC, slotless, hole 13.0 1 = #45 Steel CNC, slotless, hole 13.0 Overload Clutch 0 = Without (For overload clutch must choose #1_With) 1 = Two micro switches cut off the actuator at end of stroke 2 = Two micro switches send signal at end of stroke (signal type: normally closed) Brake ElectromagneticBrake See page...

MAI Ordering Key AppendixRetracted Length (mm) 1. Calculate A+B + C = Y 2. Retracted length needs to > Stroke + Y A. Type B. Mechanical Brake ACME Ball ACME Ball ACME, DC ACME, AC Ball, DC Ball, AC 1 = #45 Steel CNC, without slot, hole 13.0 Front Attachment (mm) 1 = #45 Steel CNC, without slot, hole 13.0

MA1 Ordering Key Appendix Direction of Rear Attachment (Counterclockwise) 1 = 90° (Standard) Electromagnetic Brake

Wire Definition Port Wire Color Wire Gauge Output Signal 0. Without Port Wire Color Wire Gauge Output Signal 0. Without RET+ White Black The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice.