- Catalogs
- Timmer GmbH
- Gesamtkatalog: Flüssigkeitspumpen (40 Seiten)
Gesamtkatalog: Flüssigkeitspumpen (40 Seiten)
Gesamtkatalog: Flüssigkeitspumpen (40 Seiten)
- This brochure is intended exclusively for industrial customers.
- Prices listed are exclusive of turnover taxes.
- All brand names mentioned are registered trademarks of their respective owners.
- All prices, drawings, and product images are non-binding and subject to change without notice.
- Products are designed for typical dosing technology applications; other uses require written authorization from Timmer-Pneumatik GmbH.
- Timmer-Pneumatik GmbH, Dieselstraße 37, D-48485 Neuenkirchen, Germany
- Phone: +49(0)5973-94930, Fax: +49(0)5973-949390
- Website: www.timmer-pneumatik.de, Email: [email protected]
- General Managers: Herbert Timmer, Dagmar Timmer, Wolfgang Kamlage, Klaus Gehrmann
- VAT-ID: DE 124388442
- Liquid Pumps: Double diaphragm pumps, proportional injectors, piston pumps.
- High Pressure Double Diaphragm Pumps: Available in various sizes and materials, with flow rates ranging from 8 l/min to 900 l/min and operating pressures from 0.5 to 8 bar.
- Proportional Injectors: Dosing range from 0.2% to 20%.
- Pneumatic Piston Pumps: Includes coagulant and glue pumps.
- Double Diaphragm Pumps: Available in sizes from 1/4" to 3", with various fluid connections and materials such as stainless steel and POM.
- Operating pressure ranges from 2 to 7 bar, with maximum flow rates up to 900 l/min.
- Materials used include stainless steel (AISI 304), PTFE, and corrosion-resistant spring steel.
- ATEX certification available for certain models.
- Universally applicable, oil-free operation, low maintenance, and capable of running dry.
- Compact design with a long lifespan and non-wearing ceramic valves.
- Good chemical resistance and reasonably priced.
- Viscosity range for fluids includes water, kerosene, ethanol, engine oil, glycerin, and more.
- Material resistance must be checked on a case-by-case basis for acids, bases, paints, solvents, and other substances.
- Transmission Ratio: 1 to 1
- Maximum Flow Rate: Varies by model, up to 150 l/min
- Actuator: Pneumatic
- Fluid Connections: G1/2” to G1-1/4” female thread, 90° orientable
- Operating Pressure: 1 - 8 bar
- Compressed Air Connection: Ø 8 mm hose
- Suction Height, Dry: Up to 4 m
- Weight: Varies by model, up to 15 kg
- Viscosity: Up to 15,000 mPas
- Max. Temperature: Up to 65°C
- Noise Level: < 70 dB(A)
- Strokes: Up to 8 double strokes/s
- ATEX Certification: RL 94/9/EG C`II2 G/D
- Centre Block: Aluminum die cast
- Cover: Stainless steel (AISI 316)
- Seals: FEPM, NBR
- Valve Seat and Ball: Stainless steel (AISI 316)
- Diaphragm: PTFE/NBR composite
- Control Valve: Ceramic flat slide valve
- Universally applicable with good chemical resistance
- Oil-free operation and reliable starting due to spring valve
- Sturdy design, reasonably priced, and low-maintenance
- Suitable for dry running with medium-contacting parts made of stainless steel
- Simple exchange of diaphragms and easy flushing
- Materials: Stainless steel (AISI 304, AISI 316), spring steel, PP, PVDF, PTFE.
- Dimensions: Various dimensions provided for different pump models.
- Fluid Flow Rate: Ranges from approximately 340 l/min to 900 l/min depending on the pump model.
- Operating Pressure: 2 - 7 bar for most models, with a high-pressure model capable of up to 20 bar.
- Temperature Range: Maximum fluid temperature ranges from 60°C to 95°C.
- Viscosity: Can handle fluids with viscosity up to 15,000 mPas.
- Noise Level: Approximately 82 db(A).
- Universally applicable and suitable for a variety of fluids.
- Oil-free operation and low maintenance requirements.
- Capable of running dry safely.
- Good chemical resistance and no spring-loaded valve balls or O-ring seals on valve balls.
- Can handle solids up to a diameter of 10 mm.
- Drive: Pneumatic, self-priming, volumetric with a driving piston of Ø 90 mm and a liquid piston of Ø 46 mm.
- Transmission Ratio: 3.8 to 1.
- Pump Capacity: Approximately 73 cm³ per double stroke, with a maximum of 120 strokes per minute.
- Viscosity: Suitable for fluids up to 100,000 mPas.
- Temperature: Maximum fluid temperature of 70°C.
- Materials: Stainless steel, POM (Polyacetal), PTFE, and FKM for various components.
- Mounting Clamp Ring: For pump height adjustment, includes plastic clamp ring and clamping screw.
- Compressed Air Connection: Includes hose, filter/controller, and miniature ball valve.
- Feed Hose PVC: Available in different lengths with hose clamps and nozzles.
- Electrical Connections: Options for Schuko and Euro plugs, with grounding type plug fully assembled.
- The glue pump is a self-priming, air-operated piston dosing pump, transferring force via piston rods to the liquid piston inside the suction pipe.
- Controlled by a reversing valve within the pneumatic part.
- Features rapid heating of glue, integrated heater, high operating safety, improved glue transport, easy operation, and low noise.
- Integrated electronic counter for regulating glue filling quantity.
- Programmable strokes from 1 to 9999.
- Protection class IP65 for dust and water-jet protection.
Catalog excerpts
Wichtige Hinweise: û Dieser Prospekt richtet sich ausschließlich an Gewerbetreibende. û Die Preisangaben verstehen sich zuzüglich der gesetzlichen Umsatzsteuer. û Wir weisen darauf hin, dass alle erwähnten Markennamen eingetragene Warenzeichen ihrer Eigentümer sind. û Alle Preisangaben, die technischen Zeichnungen, Produktabbildungen, Daten etc. sind unverbindlich und wir übernehmen hierfür keine Gewähr. Bitte beachten Sie das Copyright. û Alle in den Unterlagen aufgeführte Produkte sind nur für typische Dosiertechnik Anwendungen ausgelegt. Jeder andere Einsatzzweck bedarf einer schriftlichen Genehmigung der Firma Timmer-Pneumatik GmbH. pneumatik Timmer-Pneumatik GmbH Dieselstraße 37 D-48485 Neuenkirchen Germany Tel.: 0 59 73/94 93-0 Fax: 0 59 73/94 93-90 www.timmer-pneumatik.de [email protected] Geschäftsführer: Herbert Timmer, Dagmar Timmer, Wolfgang Kamlage, Klaus Gehrmann USt-Id-Nr.: DE 124388442 Handelsr. Nr.: HRB 3728 PUMPEN • PNEUMATIK • VAKUUMTECHNIK • VAKUUMHEBETECHNIK • DOSIERTECHNIK • SONDERLÖSUNGEN
Open the catalog to page 1
Important notes: û This brochure is exclusively for industrial customers. û Turnover taxes have to be added to the listed prices. pneumatik û All stated brand names are registered trade marks of their owners. û All prices, drawings, product pictures etc. are without obligation. Please notice the copyright. û All products listed in these documents are to be used for typical dosing technology applications. For other application purposes a written authorization by Timmer-Pneumatik GmbH is required. Timmer-Pneumatik GmbH Dieselstraße 37 D-48485 Neuenkirchen Germany Phone +49(0)5973-94930 Fax +49(0)5973-949390...
Open the catalog to page 2
Flüssigkeitspumpen pneumatisch Liquid pumps pneumatic Doppelmembranpumpen, Proportionaldosierpumpen, Kolbenpumpen Double diaphragm pumps, Proportional injectors, Piston pumps Entwickelt und produziert in Deutschland * Designed and manufactured in Germany * 3:1 HOCHDRUCK DOPPELMEMBRANPUMPEN 3:1 HIGH PRESSURE DOUBLE DIAPHRAGM PUMP 1:1 DOUBLE DIAPHRAGM PUMP PROPORTIONAL INJECTORS PISTON PUMPS Timmer-Pneumatik GmbH • Dieselstraße 37 • D-48485 Neuenkirchen • Tel.: +49(0)5973/9493-0 • Fax: +49(0)5973/9493-90 • internet: www.timmer-pneumatik.de
Open the catalog to page 3
IMMER FÜR SIE VOR ORT: A L W AY S T H E R E W H E N YO U N E E D U S : HAUPTSITZ WERK I HEADQUARTERS TIMMER-PNEUMATIK GMBH TIMMER-PNEUMATIK GMBH Dieselstraße 37 D-48485 Neuenkirchen Germany Auf der Lauge 4 D-48485 Neuenkirchen Germany Tel.: +49 (0)5973-9493-0 Fax: +49 (0)5973-9493-90 E-Mail: [email protected] www.timmer-pneumatik.de Tel.: +49 (0)5973-9493-0 Fax: +49 (0)5973-9493-90 E-Mail: [email protected] www.timmer-pneumatik.de Kiel Rostock Lübeck Braunschweig Magdeburg Salzgitter Oberhausen Dortmund Bottrop Moers Essen Witten Duisburg Krefeld Wuppertal Halle Saale Remscheid Solingen Mönchen- Leverkusen...
Open the catalog to page 4
Typenschlüssel Flüssigkeitspumpen / Type code liquid pumps PTI Mittelteil (nicht medienberührt) / Middle section not medium affected AL = Aluminium Serie / Series Typ / Type MHD = Membranpumpe Hochdruck / High pressure double diaphragm pump MEM = Membranpumpen / Diaphragm pump O-Ring FKM + andere / others Sitz / Seat VA + andere / others Bauform / Design Max. Förderleistung (l/min) / Max. flow rate (l/min) 8, 12, 50, 60, 150 Kugel / Ball PTFE + andere / others Feder / Spring V= ohne Feder / without spring I = inline Membrane / Diaphragm PTFE + andere / others Gehäuse (medienberührt) / Housing...
Open the catalog to page 5
Serie PTI Schnell-Ubersicht Flussigkeitspumpen / Quick overview liquid pumps Doppelmembranpumpen / Double diaphragm pumps BaugroRe Typ Flussigkeitsanschlusse Forderleistung Betriebsdruck Gehause Seite Size Type Fluid connections Flow rate Operating Housing Page 1/2" PTI-MEM1060 federbelastete Ventilkugeln / 60 l/min 0,5-8 bar VA 12 spring-loaded valve balls 1/2" PTI-MEM1060V ohne federbelastete Ventilkugeln / 60 l/min 0,5-8 bar VA 14 without spring-loaded valve balls 1" PTI-MEM1150 federbelastete Ventilkugeln / 150 l/min 0,5-8 bar VA 16 spring-loaded valve balls Zubehor Doppelmembranpumpen /...
Open the catalog to page 6
Schnell-Ubersicht Flussigkeitspumpen / Serie PTI Quick overview liquid pumps Hochdruck Doppelmembranpumpen 3:1 / High pressure double diaphragm pumps 3:7 BaugroRe Typ Flussigkeitsanschlusse Forderleistung Betriebsdruck Gehause Seite Size Type Fluid connections Flow rate Operating pressure Housing Page Proportionaldosierpumpen / Proportional injectors Dosierung / Dosing Pneumatische Kolbenpumpen / Pneumatic Piston pumps Pneumatische Koaguliermittelpumpen / Pneumatic coagulant Pneumatische Leimpumpen / Pneumatic glue pumps 34 Pneumatische Container - Leimpumpen / Pneumatic container - glue pumps...
Open the catalog to page 7
Doppelmembranpumpe / Double diaphragm pump 1/4“ POM ATEX C`II2 G/D ca. 8 l/min approx. 8 l/min Doppelmembranpumpe / Double diaphragm pump Bestell-Nr. / Typ / Type Part no. Abmaße / Dimensions Technische Daten / Technical data Druckluftanschluss Ansaughöhe trocken Ansaughöhe nass Gewicht Viskosität Fördermedium Max. Mediumtemperatur Geräuschpegel Hübe ATEX Transmission ratio Maximum flow rate Actuator Fluid connections Operating pressure Compressed air connection Suction height, dry Suction height, wet Weight Viscosity (fluid) Max. temperature (fluid) Noise level Strokes ATEX 1 zu 1 ca. 8 l/min...
Open the catalog to page 8
Doppelmembranpumpe / Double diaphragm pump 1/4“ POM Merkmale / Characteristics Universell einsetzbar Ölfreier Betrieb Wartungsarm Trockenlaufsicher Kleine kompakte Bauform Hohe Lebensdauer Verschleißfreies Keramikventil Anlaufsicher durch Sprungventil Gute Spülbarkeit der Membrankammern Gute chemische Beständigkeit Preisgünstig Medien / Fluids Säuren, Laugen, Farben, Lacke, Lösungsmittel, Kleber, Leim, Abwasser, Diesel, Heizöl und vieles mehr. Die Beständigkeit der Materialien muss im Einzelfall geprüft werden. Acids, bases, paints, lacquers, solvents, adhesives, glue, sewage, diesel, heating...
Open the catalog to page 9All Timmer GmbH catalogs and technical brochures
stackLIFT4 Pages
heavyLIFT4 Pages
quickLIFT4 Pages
lightLIFT4 Pages
FLUIDPUMPS84 Pages
HIGH-PERFORMANCE PUMPS2 Pages
pompe catalogue48 Pages
Image-Prospekt6 Pages
