Industrial Power Transmission Belts

Still and always Performance Driven. Performance Proven! Meeting Timken’s highest quality standards is no easy task. Since the acquisition of Carlisle belts in 2015, everything about a Timken® belt has been weighed against the high expectations associated with the Timken brand. From the science behind each individual component, to the final rounds of rigorous testing – every Timken belt is measured against the highest bar. Best-in-Class Engineering and Development • • Advanced Compound and Material Sciences • Exacting Tolerances for Dimensional Criteria Stringent Testing Criteria • • State-of-the-Art...

Timken Belts Catalog Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Performance Driven. Performance Proven . . . . . . . . . . . . . . . . . . . 4 Chek Mate V-Belt Matching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Static Conductive...

Timken Belts Catalog Belt Type Double Angle V-Belts 177 Double Angle V-Belt AA, BB, CC Double-V (Hexagonal) Belt 177 FHP V-Belts 181 Durapower® II FHP V-Belt 2L-R, 3L-R, 4L-R, 5L-R Light Duty Fractional Horsepower V-Belt 181 Variable Speed V-Belts 187 Variable Speed Cog-Belt® V Variable Speed Belt 187 V-Ribbed Belts 195 Vee-Rib™ Belt J V-Ribbed Belt 195 Vee-Rib™ Sleeve J Uncut Full Factory Width Sleeve 206 Specialty Belts 207 Cotton Drive® Timing Belt CCB One Inch Pitch Timing Belts 209 Dry Can Belt CC-S Deep-Groove Double Angle Belt 211 Feather Picker Belt AAX-FP, BBX-FP Double Angle Cog-Belt...

Timken Belts Introduction Our People The strength of Timken is its people. For over a century, Timken Belts has adhered to a philosophy of supplying innovative products, unrivaled quality, and superior customer service. Our Service Timken belts are supplied to distributors and original equipment manufacturers who seek the optimum in quality and service. Every belt is backed by extraordinary engineering and technical support, and by our personal, knowledgeable, and attentive customer service team. ® On-Time Delivery Understanding the importance of on-time delivery and fast turnaround, Timken’s...

Timken Belts Performance Driven. Performance Proven It’s no accident that Timken  belts are built to outlast and outperform competitor’s belts. That’s why recognized original equipment manufacturers turn to Timken to make belts for their products. Every Timken belt is the result of science, engineering, and years of experience. Timken’s innovative product development, specially formulated components, time-tested methods, and state-of-the-art manufacturing techniques set us apart from the competition. The team of belt experts at the Technical Center in Springfield, Missouri is dedicated to the...

Timken Belts Performance Driven. Performance Proven Chek Mate V-Belt Matching Chek Mate is a process that manufactures v-belts to meet or exceed the Association for Rubber Products Manufacturers (ARPM) tolerances for a matched set. Timken belt plants and Technical Center are registered as compliant with the International Standard ISO 9001:2015. ISO requirements include: Matching numbers are not required on Timken belts which carry the distinctive Chek Mate logo or icon: Super Blue Ribbon , Super II , Super Power-Wedge , Power-Wedge Cog-Belt and Gold-Ribbon Cog-Belt . Management that is committed,...

Timken is a proud member of: Outdoor Power Equipment Aftermarket Association WARNING Failure to observe the following warnings could create a risk of death or serious injury. Static electricity created by a belt in operation can ignite an explosive atmosphere. Special care must be taken in the utilization of belts in or near locations which may contain explosive concentrations of combustible gases or accumulations of dust such as grain, coal, or other combustible materials. Proper dissipation of such potential static electricity discharge must be assured to prevent any such explosion. The following...

General Information Static Conductive Belts Under certain conditions of temperature and humidity, a belt drive may generate static electricity. Belts intended for operation in a potentially dangerous atmosphere should be constructed with a relatively low electrical resistance characteristic. It has become common practice to specify and refer to such belts as “static conductive,” “static dissipating,” or “anti-static.” Timken V-Belts Generation of radio interference that can cause disturbance to electrical apparatus Risk of ignition and explosion in an atmosphere with high levels of combustible...

Timken Belts A History of Innovation. A Tradition of Excellence A commitment to customers and to quality has remained steadfast throughout the long and rich history of the Timken Belts business. 1905 Dayton Rubber Manufacturing Company (DRMC) founded in Dayton, Ohio 1994 Introduces RPP Panther belts 1995 Introduces Super II classical v-belt line 2001 Carlisle Companies Inc. acquires the industrial belt division of Dayco 1921 DRMC invents first raw edge v-belt 1926 Patents raw edge cog-belt 1934 Pioneers use of synthetic rubber technology 2014 Introduces belts made out of EPDM 1957 Develops arched...

Timken Belts PTplace Check pricing, availability, place orders and check order status 24 hours a day in the Timken Store on PTplace at www.ptplace.com. If your business is already using the Timken Store, no change is required. Belts are visible for order entry. To gain access as a new user, please contact a belt customer service representative at 877-484-6536 . (PTplace is only available in North America to authorized distributors.) Catalog Features This catalog is intended as a guide to the standard line of Timken belts. Special belt types and constructions not shown in this catalog may also...