TimeLink microsystems © © © © G © TMD2112 Switch and distribution of IRIG B002 Code (DCLS) The TMD2112 allows switching between two digital time code and providing the code on its outputs. The equipment is in the form of a rack shelf 19 inches high 1U It has 12 outputs divided on 6 connectors. The power supply is redounded. Operations On the front panel, 2 groups of 3 LEDs, combined with 2 push buttons allow: • Selects the mode: Automatic or Manual • Selects source in manual mode Source A or Source B • Indicates the source chosen • Indicates the status of the source Remote control Remote control is done via Ethernet connection /IP 10/100 Mbit/s or via http protocol which makes it possible to obtain information on the state of the equipment: • Operating mode • Track status • Channel selection IRIG B DCLS DISTRIBUTION UNIT TimeLink microsystems Information contained in this document is subject to changes without further notice. FP2076A1 Les informations contenues dans ce document sont susceptibles d'etre modifiees sans preavis. www.timelinkmicro.com. TIMELINK MICROSYSTEMS 14 rue Jean Perrin 31100 Toulouse Tel. : +33 (0)5 62 87 10 70

TimeLink microsystems Specifications Inputs Standard 200-98 compatible IRIG B002 signal not modulated Electric interface RS422/RS485 Outputs Input signal A or B copy Electric interface RS422/RS485, 12 outputs Switching Le temps de commutation est <100ms. The time to detect a fault on an input is <50ms The switching time is < 100ms Redundant AC power 2 x 230V AC Power supply CEE 2P + T socket with mains filter, M / A switch Voltage: 85-264VAC / 47-440Hz Power consumption: <20W to 230VAC over 50 Hz per power supply Connections The input and output signals are done via the rear panel of the equipment The...