1100 SERIES Time-Code Amplifier distributor Features  The SR1100 amplifier provide analog IRIG A, IRIG B, NASA36 or any other format, Time code amplification and distribution. The time codes are based on a 1 kHz (or 10 kHz) amplitude modulated (1/3 or 1/1) sinewave carrier.  The equipment is housing in a 1U rack mount unit.  On the front face two LED shows the equipment status: the LED « ON » indicate the power supply on. The LED « SIGNAL » indicates the presence of an input code. Time code amplifier :  In input the equipment receives an analog signal from an external IRIG A, IRIG B, NASA 36 source.  When detecting an input signal, the LED « SIGNAL » turns on. The amplified signal is distributed over the 12 outputs of the equipment. Settings : Each of the twelve outputs track could be adjusted. These settings are : the gain of each output amplifier, the output signal phase. The gain of each amplifier is adjusted by a dedicated potentiometer.  The output level is independently settled for each type of output.  The phase could be reversed up to 180° by mean of dedicated truck strap.  All the input/outputs connectors are located on the rear face of the equipment.  The power supply uses a fused standard 230V AC connector, CEE compliant, with filter & ONN/OFF switch.  The analog time code signal connector is a base isolated female BNC. The input c

SR1100 Time Code Amplifier-distributor Specifications  Time code input: isolated BNC, 600  transformer or BR2. 1 kHz or 10 kHz amplitude modulated sine-wave carrier (1/3 or 1/1).  Amplified code output: isolated BNC (600  transformer or BR2) adjustable output level .  Width = 19” (481 mm), Height = 1U (44.5 mm), Depth 351 mm  Weight: 1,5 Kg.  Consumption: 20 W.  MTBF = 63 000 h Ordering information BNC connectors - 12 outputs + Alarm output on SubD connector (dry contact), led on front panel BR2 connectors - 12 outputs + Alarm output on SubD connector (dry contact), led on front panel...