MODEL 108C
2Pages

Motor Rotation Indicator • Saves Time - Eliminates Guesswork • No Need to Disconnect Driven Unit Shaft Couplings • No External Power Required • Latching Circuit Rotating an electric motor shaft in the wrong direction can cause severe mechanical damage to expensive machinery. The Model 108C Motor Rotation Indicator can quickly show shaft rotation direction, thus becoming a valuable addition to your shop equipment. Designed for the installation of conveyer lines, pump systems, and interconnected drives, the Model 108C requires only a few seconds to determine the proper connections to be made. The three leads are color coded: Red=phase A, Black=phase B, and White= phase C. This small device will allow you to connect all motors to run in the proper direction. TYPICAL APPLICATION E-mail: sales@time-mark.com Internet: http://www.time-mark.com 1 1440 East Pine Street Tulsa, Oklahoma 7411 6 11/2011 © 2011 TIME MARK CORPORATION TIME MARK is a division of

Motor Rotation Indicator READ ALL INSTRUCTIONS BEFORE INSTALLING, OPERATING OR SERVICING THIS DEVICE. KEEP THIS DATA SHEET FOR FUTURE REFERENCE. GENERAL SAFETY DO NOT CONNECT THE LEAD WIRES OF THE MODEL 108C TO ANY MOTOR OR OTHER ELECTRICAL SOURCE TO WHICH POWER IS APPLIED. Model 108C contains its own low voltage power source and can be severely damaged if external power is applied. OPERATION Disconnect the motor from the power line. Connect the three leads on the Model 108C to the three motor leads. Press the CHARGE button, marked FIRST. Hold for at least 5 seconds, then release. Press the...