Catalogs >
Time Electronics >
Electrical Test Calibrators

Electrical Test Calibrators
10Pages

Catalog excerpts

Time Electronics Calibration, Test and Measurement Electrical Test Equipment Calibrators For calibration of loop, RCD, insulation testers and PATs

Open the catalog to page 1

Electrical Test Calibrators

Open the catalog to page 2

Electrical Test Equipment Calibrators A range of instruments that provide users with calibration capabilities for electrical testers and meters. With these products you can test and verify the broad scope of electricians testing devices, accurately and efficiently. There are various types of testers that check a wide range of electrical parameters. Models can be either single-function devices or comprehensive multifunction units. A combination of calibration equipment is often needed to test and verify different types and functions. The 5068 and 5069 models are primarily resistance units...

Open the catalog to page 3

5030 Electrical Tester Calibrator Description A precision instrument designed to calibrate RCD, loop, insulation, earth testers and multifunction installation testers. The 5030 accurately simulates RCD trip times and measures currents produced by RCD testers. It replicates loop impedance and auto adjusts for local line impedance. It also provides insulation resistances and measures test voltages and currents. User control is via the central navigation keypad. Scrolling though menus and settings is intuitive and easy, with measurements and settings shown on the large clear LCD display....

Open the catalog to page 4

5030 Specifications Technical Specifications Loop Function Range / Values Loop Impedance Resistor Values Local Loop Compensation Test Current Range / Values Trip Time ± 0.5 % of reading ± 1 % with x5 multiplier Current Multipliers Maximum Current AC, DC & half wave rectified Phase Detection Insulation Function Resistance Test Voltage Measurement @ 0.5 mA or 1.0 mA Load Range / Values Range / Values Continuity Function Test Voltage Measurement (input resistance 10 MΩ) Test Current Measurement (between 1 Ω and 2 Ω) Power Dissipation Voltage Function Line Voltage Measurement Line Frequency...

Open the catalog to page 5

5068 Insulation Tester Calibrator Description A precision instrument suitable for calibrating and testing general purpose insulation testers and megohmmeters with test voltages up to 2.5 kV. It is constructed in a high strength co-polymer plastic case and is powered by a rechargeable battery. This ensures full isolation from the mains and prevents stray leakage. The insulation tester being calibrated can be tested for open circuit voltage and short circuit current. These are displayed on the digital meter mounted on the front panel. Nine selectable precision resistors provide the insulation...

Open the catalog to page 6

5069 Insulation Tester Calibrator Description A precision instrument suitable for calibrating and testing general purpose insulation testers and megohmmeters with test voltages up to 10 kV. Features • Insulation resistance from 100 kΩ to 100 GΩ It is constructed in a high strength co-polymer plastic case and is powered by a rechargeable battery. This ensures full isolation from the mains and prevents stray leakage. The insulation tester being calibrated can be tested for open circuit voltage and short circuit current. These are displayed on the digital meter mounted on the front panel. The...

Open the catalog to page 7

Description The 5070 DuctorCal is a portable instrument suitable for calibrating high current ductor testers and micro-ohm meters. It incorporates 5 sets of high current standard resistors that are used to enable precision calibration. It has full 4 terminal capabilities with extra large terminals for the current connection. Gold plated terminals are used throughout to reduce contact resistance and thermal EMFs. It has a substantial maximum continuous current rating, but can also be used with much higher transient/pulse test currents. The internal resistance standards are all high quality...

Open the catalog to page 8

Description A precision calibrator designed to provide rapid high accuracy calibration of portable appliance testers and insulation/continuity testers. The 5080 has calibration functions for earth bond, insulation, leakage, touch leakage, and load test. It is a practical and simple operation instrument that can be utilsed in the lab as a calibration standard or as a mobile testing unit for site calibration work. Housed in a robust safety case the 5080 is easily portable, rugged and ideal for field use. It is battery powered, which ensures isolation and prevents inaccuracies due to stray...

Open the catalog to page 9

Time Electronics Calibration, Test and Measurement Time Electronics Ltd, Unit 5, TON Business Park, 2-8 Morley Road, Tonbridge, Kent, TN9 1RA. United Kingdom. T: +44 (0) 1732 355993 Due to continuous development Time Electronics reserves the right to change specifications without prior notice.

Open the catalog to page 10