CBP-PRES2: Pressure CalBench Package A pre-configured CalBench for pressure instrumentation calibration About the Package The CBP-PRES2 is a dedicated pressure calibration workstation with modules and extras that enable users to efficiently calibrate instrumentation like transmitters and gauges. It is an advanced system suitable for instrument workshops performing internal calibration and commissioning. The CalBench features an 8030B auto-pneumatic controller module for calibration work from vacuum to 40 bar (600 psi). The line pressure and vacuum to this module is via the 7149 and 7165 electric pumps, meaning no need for an external supply. For higher range pneumatic work, a 100 bar (1500 psi) regulated module with digital gauge provides a practical calibration method with high accuracy reference. Line pressure to this module is typically via a compressed air or N2 cylinder. A custom regulator kit is included, for fitting to the cylinder at site, with all necessary connections to the CalBench. Additional pressure calibration can be performed using high accuracy measurement modules for pneumatic and hydraulic applications. These are commonly utilised with the supplied benchtop pumps that feature dual outputs to connect both the module and UUT. Manifolds, test stand, adaptors and fittings are also provided. The 8060+ module situates centrally in the console, providing source, simulation and measurement of process signals, HART communication and 24 V loop power. It features an integral multimeter, and a PC control centre with 12.1” touch screen display. Pressure control and readback applications are included. EasyCal software communicates with pressure modules, and can be used for automated calibration and test management. Features - CalBench for automated pressure calibration work - Pneumatic controller module for vacuum to 40 bar (600 psi) - Regulated 100 bar (1500 psi) module with digital gauge - Multifunction process calibrator module with 6.5 digit multimeter - Control centre module with 12.1” touch screen display - Pressure measurement modules with control centre interface - Self-sufficient with electric vacuum & pressure pumps to 45 bar - Regulator kit for high pressure cylinder supplied - Pneumatic & hydraulic benchtop pumps, adaptor kit, UUT stand - Fixed and variable DC power supply modules - Automated calibration with EasyCal software, peripherals supplied - Under bench mobile unit & holder, perforated panel fittings, tool kit Time Electronics Ltd, Unit 5 T O N Business Park, 2-8 Morley Road, Tonbridge, Kent, TN9 1RA, United Kingdom T: +44 (0) 1732 355993 | F: +44 (0) 1732 350198 | [email protected] | www.timeelectronics.co

CBP-PRES2: Pressure CalBench Package A pre-configured CalBench for pressure instrumentation calibration Basic Description Basic Purpose CalBench Heavy Duty Version (W 2000 x D 850 x H 1568 mm) Framework bench style with worktop, perforated panel, primary console with 7082 mains power controller module. Provides an ergonomic workspace for various calibration applications. Modules below to be fitted to the primary console for testing workload. Perfo Panel Option: 40 piece Tool Hook Kit For holding various tools and accessories. Perfo Panel Option: Shelf (W 450 x D 250 x H 130 mm) Suitable for storing...