Catalogs >
Time Electronics >
7016 Regulated Low Pressure Calibrator Data Sheet

7016 Regulated Low Pressure Calibrator Data Sheet
2Pages

Catalog excerpts

7016 Regulated Low Pressure Calibrator Data Sheet - 1

Time Electronics 7016 Regulated Low Pressure Calibrator Description The 7016 is a fully integrated pressure test and calibration system. It is suitable for field and laboratory calibration work of both regulated low pressure and electrical process loop signals. The instrument is available in pressure or vacuum regulated configuration, with the range specified on ordering. There are five available versions according to required output range, either vacuum, 0.2, 2, 5, or 10 bar. The 7016 combines high accuracy with simple operation, and is the popular choice for test engineers performing pressure calibration applications under 10 bar. It is an easy to use instrument suitable for calibration and maintenance of pressure gauges, sensors, transmitters, transducers, indicators, switches, and more. Features include a 4.5 digit LCD display, 4 pressure units plus mA, zeroing switch, and regulator for output control. Basic pressure accuracy is 0.04 % of full scale and line pressure is supplied via an input quick release port fitted on the side of the unit. For process signal calibration the loop signal is displayed on the LCD display to 0.05 % accuracy. Loop drive supply (24 V or 36 V) is also provided. Both pressure and loop signal can be displayed at the same time to speed up the calibration of pressure transmitters. Additionally a continuity function is available for testing for open circuit loops. Power is via internal rechargeable cells (24 hours typical use) with a built-in mains charger. The unit can be powered directly from the mains if required. The 7016 is housed in an impact resistant safety case that provides protection and increased durability. All pressure connections are on the side of the case. The instrument is supplied with a pressure hose, electrical test lead, 2 electrical probes and 2 crocodile clips. Options For the 7016, input pressure for regulation can be provided by a compressor or gas cylinder. When used as a measuring instrument in the field, pressure can be generated by pumps like the 7090 pneumatic hand pump (vacuum to 40 bar). The 7090 is compact with comfortable handles with grips moulded into the design make it easy to control the instrument whilst pumping up to pressure. Also available are a range of pumps suitable for workshop use, that feature an ergonomic mode of operation. These models include the the 7193 (vacuum to 40 bar pneumatic) and 7192 (vacuum to 25 bar pneumatic). Features • Vacuum to 10 bar versions available • Accuracy 0.04 % of full scale • Pneumatic • 4 selectable pressure units plus mA • Loop current measure • 24/36 V loop power • Over-pressure alarm • RS-232 serial interface • EasyCal software compatible • Mains or battery powered EasyCal Calibration Software The 7016 can be controlled with readback via Time Electronics EasyCal software to automate the calibration process. This provides increased speed of calibration and consistency of results. Produce traceable calibration certificates and test reports for quality standards with additional uncertainty information for ISO 17025 conformance. For process control signal simulation a practical tool like the Time Electronics handheld 7006 Loop-Mate is available as an option. It is a low cost, simple operation unit that provides 4 - 20 mA and 0 - 10 V signals at levels of 0 %, 10 %, 25 %, 50 %, 75 %, 90 %, 100 %. It can also step through these set points automatically to allow hands-free calibration. It is battery powered and compact, pocket sized and easy to carry in the field. Time Electronics Ltd, Unit 5, T O N Business Park, 2-8 Morley Road, Tonbridge, Kent, TN9 1RA, United Kingdom T: +44 (0) 1732 355993 | F: +44 (0) 1732 350198 | mail@timeelectronics.co.uk | www.ti

Open the catalog to page 1

7016 Regulated Low Pressure Calibrator Data Sheet - 2

Time Electronics 7016 Regulated Low Pressure Calibrator Technical Specifications Pressure - Regulator on all ranges Range (bar) Option Code Time Electronics Ltd, Unit 5, T O N Business Park, 2-8 Morley Road, Tonbridge, Kent, TN9 1RA, United Kingdom T: +44 (0) 1732 355993 | F: +44 (0) 1732 350198 | mail@timeelectronics.co.uk | www.timeelectronics.com

Open the catalog to page 2