Time Electronics 5069 Insulation Tester Calibrator Description A precision instrument suitable for calibrating and testing general purpose insulation testers and megohmmeters with test voltages up to 10 kV. Features • Insulation resistance from 100 kΩ to 100 GΩ It is constructed in a high strength co-polymer plastic case and is powered by a rechargeable battery. This ensures full isolation from the mains and prevents stray leakage. The insulation tester being calibrated can be tested for open circuit voltage and short circuit current. These are displayed on the digital meter mounted on the front panel. The insulation resistance is provided by a precision 4 dial decade resistance bank which can be set to a maximum of 99.99 GΩ with additional resistance values of 100 kΩ, 200 kΩ, 500 kΩ, 1 MΩ, 2 MΩ and 5 MΩ which can be switched in as required. Rugged and portable, the 5069 is ideal for site calibration work. Also available is the 5068 InsCal, 2.5 kV version. • Continuous connection – no arcing • Up to 10 kV operation • Battery operation (>150 hrs between charges) • Fully shrouded safety connectors • Display of open circuit voltage • Display of short circuit current Due to continuous development Time Electronics reserves the right to change specifications without prior notice. Time Electronics Ltd, Unit 5, T ON Business Park, 2-8 Morley Road, Tonbridge, Kent, TN9 1RA, United Kingdom T: +44 (0) 1732 355993 | F: +44 (0) 1732 350198 | [email protected]