Time Electronics 5068 Insulation Tester Calibrator Description A precision instrument suitable for calibrating and testing general purpose insulation testers and megohmmeters with test voltages up to 2.5 kV. It is constructed in a high strength co-polymer plastic case and is powered by a rechargeable battery. This ensures full isolation from the mains and prevents stray leakage. The insulation tester being calibrated can be tested for open circuit voltage and short circuit current. These are displayed on the digital meter mounted on the front panel. Nine selectable precision resistors provide the insulation resistance test. Also fitted are 4 fixed low resistance values for verification of the low ohm ranges and continuity. Rugged, compact and portable, the 5068 is easy to transport and ideal for site calibration work. Also available is the 5069, 10 kV version. Features • Insulation resistance from 100 kΩ to 10 GΩ • Low ohm verification at 1 Ω, 10 Ω, 100 Ω, 1 kΩ • Basic accuracy 1 % • Up to 2.5 kV operation • Battery operation (> 150 hrs between charges) • Continuous connection – no arcing • Fully shrouded safety connectors • Display of open circuit voltage • Display of short circuit current Ordering Information Due to continuous development Time Electronics reserves the right to change specifications without prior notice. Time Electronics Ltd, Unit 5, T O N Business Park, 2-8 Morley Road, Tonbridge, Kent, TN9 1RA, United Kingdom T: +44 (0) 1732 355993 | F: +44 (0) 1732 350198 | mail@timeelectronic