TF820-E
8Pages

{{requestButtons}}

Catalog excerpts

TF820-E - 1

“The Leader in Rubber-Tire Forest Machines!” Rubber Tire Machines! “The

Open the catalog to page 1
TF820-E - 2

Versatility And Productivity In Any Form The TF820-E eight-wheeled machine has been called “Proteus” (Greek God of change) because of the many things it can do. The TF820-E is the best forwarder on the market today and, because it has continuous swing and can work over the front, it has tremendous versatility to work in log yards, fight fires, haul concrete, do pipeline work, set ski towers and most importantly, work as a combo machine with a 10-minute change over time from the grapple to a CTL processor. This machine was designed and built to be the best, whether being used as a forwarder,...

Open the catalog to page 2
TF820-E - 3

CLAM BUNK A) Overall Height - 700 Tires Overall Height - 750 Tires E) Overall Width - Wheels Dish "IN" Overall Width - Wheels Dish "OUT" F) Ground Clearance - Hinge Pin - 700 Tires Ground Clearance - Hinge Pin - 750/28L Tires G) Ground Clearance - Bogie Arm - 700 Tires Ground Clearance - Bogie Arm - 750 Tires

Open the catalog to page 3
TF820-E - 4

Spacious SAE certified cab with heat/AC, AM/FM radio, tape player, and three escape routes. Oversized swing bearing with Lohmann swing gear and continuous swing. Large fuel tank with a 108 gallon (408 litre) capacity. 20-ton N.A.F. bogie. Rear bogie tracks perfectly with the front bogie in the tightest turns.

Open the catalog to page 4
TF820-E - 5

TimberPro’s special boom pin linkage allows an easy 10-minute change over from the grapple to a CTL processor attachment. Good access to 2-speed drop box and hydrostatic motor.

Open the catalog to page 5
TF820-E - 6

10-micron hydraulic oil filtration. Large optional supplemental oil cooler for hot weather conditions. Automatic reversing engine fan for cooling efficiency. Centralized greasing in hard to reach places. Pump drive ratio set so engine can run at 1800 R.P.M. for peak torque and best efficiency. STANDARD & OPTIONAL FEATURES Standard = S

Open the catalog to page 6
TF820-E - 7

BOOM SWEEP Lift Capacities Standard Loader Booms Lift Capacities (Without attachment) @10' @15' @23' @31' ** With optional 6' (1,5 m) squirt boom. Lift Capacities Optional Feller Buncher Booms Lift Capacities (Without attachment) @10' (3,05 m) @15' (4,57 m) @23' (7,01 m) Machine Weights and Ground Pressures TF820 Clam Bunk TF820 Forwarder *Base Machine Front Axle Rear Axle Ground Pressures (psi) [@ max load]: Front Wheels Front Wheels w/Tracks Rear Wheels Rear Wheels w/Tracks *Base Machine Front Axle Rear Axle Ground Pressures (psi) [@ max load]: Front Wheels Front Wheels w/Tracks Rear...

Open the catalog to page 7
TF820-E - 8

DIMENSIONS & SPECIFICATIONS A) Overall Height - 700 Tires Overall Height - 750 Tires E) Overall Width - Wheels Dish "IN" Overall Width - Wheels Dish "OUT" F) Ground Clearance - Hinge Pin - 700 Tires Ground Clearance - Hinge Pin - 750/28L Tires G) Ground Clearance - Bogie Arm - 700 Tires Ground Clearance - Bogie Arm - 750 Tires TimberPro, LLC P.O. Box 415, Shawano, WI 54166 Phone 715 524 7899 Fax 715 524 7898 TimberPro reserves the right to change specifications without notice or obligation. Products illustrated may be equipped with non-standard equipment. Other manufacturer’s equipment or...

Open the catalog to page 8

All TimberPro catalogs and technical brochures

  1. Forwarders

    6 Pages

  2. TIMBERPRO

    6 Pages

  3. TDS-22

    2 Pages

  4. TBS-32

    2 Pages

  5. TB620-E

    6 Pages