Pipe Support / Pipe Clamp
8Pages

pipe SUPPORT SOLUTIONS Clip Strips Pipe Grips Bond Slips Clamp Blocks

Pipe Support Solutions Many years of experience in manufacturing pipe support systems means the TICO range is all but limitless. Whatever the application, there will be a pipe system to solve your problem. From clamp blocks, to hangers, anti-vibration, high temperatures, isolation, varying metals, sizes etc. we can provide the solution. • Fire retardant rubber moulded components do not support the surface spread of flame • Can be supplied to meet operational temperatures ranging from -50°C to +300°C • Pipe support range includes pipe hangers, pipe linings, sliding bearings, blocks and pads...

industrial installation Products and Solutions S/CL CLIP STRIPColour: Red Operating Temp: -40°C to +100°C (-40°F to 212°F) HT/CL CLIP STRIP _b_, COLOuR: Green operating temp: -40°C to +150°C (-40°F to 302°F) For data sheets or more information please contact our technical support team on +44 (0) 1579 320808

Pipe Grips TICO Pipe Grips have been designed specifically to isolate pipes, minimising vibration transmission between pipework and hanger and preventing corrosion between dissimilar metals. there are two designs of Pipe Grip, a ‘Guide type’ with PTFE inside surface to allow movement of the pipework, and a ‘Grip Type’ which securely holds the pipe in place to prevent movement. Key Features and benefits of Pipe Grips: • Fire retardant synthetic rubber moulded components which do not support the surface spread of flame. • Easy identification: Red = Cu/Ni • Black = Stainless Steel •...

Industrial Installation Products and Solutions Guide Type Nominal Pipe Size PTFE Lining Plain Washer Part Number Spring Washer Y For the D stainless pipes O/Ds of pipes ØG based on BS 3974 Part 1 1974 Table 10. are Bolting Detail Z mm *12.70 PTFE Lining For Cu/Ni pipes (based on seamless ‘Kunifer 10’ sizes) O/Ds of pipes conform to BS2871 Part 2 Table 3. BS MA 18 Table 2 BS MA60. Dimensions in mm unless otherwise stated. Non-standard sizes are available on request. * See bolt detail Z. Thes

PIPE SUPPORT SOLUTiONS TICO Bondstrips units provide a simple, economical, easy to install solution to the problem of accommodating movements in structures; for example due to expansion, contraction, settlement and variations in loading that might otherwise result in the development of high stresses and potentially damage. Typical applications of TiCO Bondslip Units include: • Low friction supports in mechanical and pipework installations • Low friction guide restraints • Temporary bearings employed during construction TICo Bondslip units have been developed over many years of involvement...

industrial installation Products and Solutions Tiflex appreciate the wide variety of applications for TICo Bondslip units and the differing requirements of each, and hence have made the design of these units as flexible as possible. tiflex are able to offer custom units incorporating: • Steel backing plates for easy installation, or units without backing plates for bonding directly to the structure on site. • Steel thickness can be varied to suit the application. • Polished stainless steel plates in place of the standard TICo upper member. • Such plates can also be supplied pre-welded to...

Clamp Blocks S/CB Clamp blocks provide protection and uniform spacing of pipe lines. They absorb shock, noise and vibration caused by fluid velocity and turbulence in pipes, high air velocity ducts, drumming of the duct wall etc. which would otherwise be transmitted through the clamp to the surrounding structure or building. TICO clamp blocks are manufactured singly or in multiple pipe carrying sections as shown. S/NG/CB S/NG/CB clamp blocks are identical to S/CB clamp blocks but with the added benefit of a molybdenum disulphide impregnated nylon bush to provide a low friction bore for the...