DS1206 BASIC-programmable Controller


Catalog excerpts

DS1206 BASIC-programmable Controller - 1

Features 10/100BaseT Ethernet port Compact (52.6x38.0mm) Up to 3.5 serial channels Superior upgrade to EM1202EV Power input/output through the serial connector Free serial-over-IP Tibbo BASIC application available About The DS1206N is a BASIC-programmable board designed primarily for serial-over-IP and serial control applications. Being small enough to t inside your product, the board offers a rapid development alternative to using modules, which require designing a new host PCB. Like the DS1206 controller, the DS1206N features a multi-channel serial port. The device has a single serial port connector and is priced as a single-port device, yet packs four independent serial channels. Have no use for those DSR and DTR lines? Turn them into RX and TX of an additional serial channel. Don’t want CTS and RTS either? That’s one more channel! In total, there are 15 different congurations to choose from. The board is supplied in three versions offering various serial port and power options. It comes preloaded with a fully functional serial-over-IP application. Three options: DS1206N-RS, DS1206N-TM, and DS1206N-TS. Superior upgrade to the EM1202EV board. Based on high-performance purpose-built 88MHz T1000 IC. 10/100BaseT, auto-MDIX Ethernet port. Up to 1024KB ash memory for rmware, application, and data. 2KB EEPROM for data storage. Four LEDs: ▪ Green and red status LEDs on top of the device; ▪ Link and speed Ethernet status LEDs on the RJ45 jack. Software-controlled onboard PLL. web: www.tibbo.com email: sales@tibbo.com Up to 3.5 serial channels: ▪ DS1206N-RS: RS232 port (DB9M connector); ▪ DS1206N-TM, “-TS”: TTL serial port (“pin header” connector); ▪ Baudrates of up to 921,600bps; ▪ None/even/odd/mark/space parity modes; ▪ 7/8 bits/character modes; ▪ Full-duplex mode with optional ow control; ▪ DS1206N-TM and “-TS”: half-duplex mode with direction control; ▪ Flexible mapping with 15 different options, such as: continued on next page phone: +886-2-26925443 address: Tibbo Technology Inc., 9F-3, No.31, Lane 169, Kang-Ning St., Hsi-Chih, Taipei, Taiwan 221

Open the catalog to page 1
DS1206 BASIC-programmable Controller - 2

Up to 3.5 serial channels (continued): ▪ A single channel: RX, TX, CTS, RTS, DSR, and DTR lines; ▪ 3.5 channels: RX, TX, RX2, TX2, RX3, TX3, and RX4 lines. ▪ DS1206N-RS: optional “12V” power output on DB9M connector; ▪ DS1206N-TM: optional “12V” power input from the serial port. Power: ▪ DS1206N-RS, “-TM”: onboard regulator, 10-24V (12V nominal); ▪ DS1206N-TS: direct 3.3V input (must be regulated to +/- 5%). Board dimensions: 52.6x38.0mm. Firmware is upgradeable through the serial port or network. Options Available models and their features Setup button Status LEDs Power switch Power jack...

Open the catalog to page 2

All Tibbo Technology catalogs and technical brochures

  1. ds10x5

    2 Pages

  2. ds10x4

    2 Pages

  3. ds10x0-2-3

    2 Pages

Archived catalogs

  1. ds1102

    2 Pages

  2. ds1101

    2 Pages

  3. ds1100

    2 Pages