Features 10/100BaseT Ethernet port 3.5-channel RS232 port (DB9) Power input/output through DB9 Optional 802.11b/g Wi-Fi interface* Optional OLED display Optional power-over-Ethernet* Compact (90x48x25mm) DIN rail, wall mounting plates included * Mutually exclusive About The DS1101 is a compact BASIC-programmable controller targeting serial-over-IP and serial control applications. The device has a single DB9M connector and is priced as a single-port product, yet packs 3.5 RS232 channels. Another feature of the DS1101 is its software-controlled power output on pin 9 of the DB9 connector — you can power an attached serial device directly through the DS1101. Alternatively, the DS1101 itself can be powered through the pin 9. The device power can also be supplied via its power jack or the optional PoE board*. The DS1101 can be equipped with a 96x32 monochrome OLED display and Wi-Fi interface*. There are eight LEDs on the device’s front: green and red main status LEDs, a yellow Ethernet link LED, and ve blue LEDs, which can be used for Wi-Fi signal strength indication. A buzzer is provided as well. The device comes preloaded with a fully functional serial-over-IP application. * Wi-Fi and power-over-Ethernet options are mutually exclusive Superior upgrade to the DS1206 device. Based on the high-performance T1000 IC. 10/100BaseT, auto-MDIX Ethernet port. Optional 802.11b/g Wi-Fi interface. Optional 96x32 monochrome OLED display. Optional power-over-Ethernet. 1024KB ash for rmware, application, and data. 2KB EEPROM for data storage. Eight LEDs: ▪ Green and red main status LEDs; ▪ Yellow Ethernet link LED; ▪ Five blue LEDs (can be used for Wi-Fi signal strength indication). Built-in buzzer. 3.5-channel RS232 port on DB9M connector: ▪ TX, RX, RTS, CTS, DTR, DSR, DCD lines; ▪ Baudrates of up to 921,600bps; ▪ None/even/odd/mark/space parity modes; ▪ 7/8 bits/character modes; ▪ Optional RTS/CTS ow control; ▪ Flexible mapping with 15 different options, such as: ▪ 1 channel: RX, TX, CTS, RTS, DSR, and DTR; ▪ 3.5 channels: RX, TX, RX2, TX2, RX3, TX3, and RX4 lines. ▪ Programmable “12V” power output on pin 9 of DB9. ▪ Pin 9 can also be used for “12V” power input. Power: 12VDC nominal (min. 9V, max. 18V). Software-controlled onboard PLL.

Specifications (continued) ■ Operating temperature range: -5 ~ 70 C. ■ Firmware is upgradeable through the serial port or ■ DIN rail mounting plate ■ Wall mounting plate and two screws ■ WAS-1499 straight Ethernet cable* Platform Objects ■ Sock — socket comms (up to 16 UDP, TCP, and HTTP sessions). Net — controls Ethernet port. Win — handles Wi-Fi interface (when present). Led — controls the OLED display (when present). Ser — in charge of serial channels. lo — handles I/O lines, ports, and interrupts. Fd — manages flash memory file system and direct sector access. Stor— provides access to the...