ds1100
2Pages

{{requestButtons}}

Catalog excerpts

ds1100 - 1

Features 10/100BaseT Ethernet port Single-channel RS232 port (DB9) Power input through DB9 Optional power-over-Ethernet Compact (90x48x25mm) DIN rail, wall mounting plates included About The DS1100 is a compact BASIC-programmable controller targeting cost-sensitive serial-over-IP and serial control applications. Built around the same T2000 ASIC as our EM500 “MiniMo” module, the DS1100 offers a single-channel RS232 port. Device power can be supplied via its power jack, pin9 of the DB9 (serial port) connector, or the optional power-over-Ethernet board. There are three LEDs on the device’s front: green and red main status LEDs, and a yellow Ethernet link LED. Each DS1100 is supplied with the DIN rail and wall mounting plates. The device comes preloaded with a fully functional serial-over-IP application. Superior upgrade to the DS203 device. Based on the high-performance T2000 IC. 10/100BaseT, auto-MDIX Ethernet port. Optional power-over-Ethernet. Single-channel RS232 port on DB9M connector: ▪ TX, RX, RTS, CTS, DTR, and DSR lines; ▪ Baudrates of up to 115200bps; ▪ None/even/odd/mark/space parity modes; ▪ 7/8 bits/character modes; ▪ Optional RTS/CTS ow control; ▪ “12V” power input on pin 9 of the DB9. 512KB ash memory for rmware and application. 200 bytes of EEPROM space for data storage. Three LEDs: ▪ Green and red main status LEDs; ▪ Yellow Ethernet link LED. Power: 12VDC nominal (min. 9V, max. 18V). Dimensions: 90x48x25mm. Operating temperature range: -5 ~ 70 C.

Open the catalog to page 1
ds1100 - 2

Specifications (continued) ■ Firmware is upgradeable through the serial port or network (including cold upgrade firmware uploads through ■ DIN rail mounting plate ■ Wall mounting plate and two screws ■ WAS-1499 straight Ethernet cable* ■ WAS-P0004(B) DB9M-to-DB9F serial cable (device-to-PC) ■ WAS-P0005(B) DB9F-to-DB9F serial cable (device-to-device) Platform Objects ■ Sock — socket comms (up to 16 UDP, TCP, and HTTP sessions). ■ Net — controls Ethernet port. ■ Ser — in charge of serial channels. ■ lo — handles I/O lines, ports, and interrupts. ■ Stor — provides access to the EEPROM. ■...

Open the catalog to page 2

All Tibbo Technology catalogs and technical brochures

  1. ds10x5

    2 Pages

  2. ds10x4

    2 Pages

  3. ds10x0-2-3

    2 Pages

Archived catalogs

  1. ds1102

    2 Pages

  2. ds1101

    2 Pages