Multi Parameter Water Quality Online Monitoring Instrument ZWIIM-mowqm06► PRODUCT INTRODUCTION ZWIN-MOWQM06 multi parameter water quality probe monitoring equipment adopts a multi in one structure design. Each sensor is equipped with a waterproof connector, which can be calibrated and replaced on site. It can connect up to 5 digital sensors from Zwinsoft Era at the same time, meeting the monitoring needs of multiple water bodies such as rivers, lakes, oceans, and groundwater. 1. Digital sensor, RS485 output, supports MODBUS 2. All calibration parameters are stored in the sensors, and each sensor comes with a waterproof connector that can be easily plugged and replaced. 3. Optional fluorescence method for dissolved oxygen, four electrode conductivity, fiber optic turbidity, digital pH, digital ORP, temperature, chlorophyll, blue-green algae, suitable for long-term online monitoring. 4. Multi in one structural design, capable of simultaneously connecting 5 probes to measure seven parameters. ► TECHNICAL PARAMETERS OF MONITORING INDICATORS Measurement range: -50-100 °C, accuracy: ± 0.5 °C, resolution: 0.1 °C Measurement range: 0-14pH, accuracy: ± 0.1 pH, resolution: 0.01 pH Measurement range: 0~10000us/cm, accuracy: 5%, resolution: 1 us/cm 4. Dissolved oxygen in water Measurement range: 0-20mg/L, accuracy:+3%, resolution: 0.01 mg/L Measurement range: 0-3000NTU, accuracy:<5% FS, resolution: 0.1 NTU 6. Ammonia nitrogen in water Measurement range: 0~100mg/L, accuracy:<8% FS, resolution: 0.1 mg/L