*mydirectindustry

VD6 vacuum controller

Product catalog summary

Overview: The VD6 - Analogline 1 Channel Vacuum Controller is designed for precise vacuum process control, featuring potential-free relay switches, two- or three-step control, and EMI compatibility. It offers adjustable gas type correction factors and a USB interface for process documentation and setpoint programming.

Specifications:

Display: LED, 13 mm, max. 4 1/2 digits, available in mbar or Torr.
Display Refresh Rate: 2 Hz (0.5 s).
Sample Rate: 20 Hz (50 ms).
Power Supply: Available in 230 VAC or 115 VAC, 50/60 Hz.
Power Consumption: Max. 3.5 W.
Operating Temperature: +5 to +50°C.
Storage Temperature: -20 to +60°C.
Signal Input: 4 - 20 mA, SubD, 9-pole, female.
Switching Outputs: 2 x relay contact, potential-free change-over switches.
Analog Output: 0-1 V or 0-10 V.
Serial Interface: Mini-USB, type B.
Protection Class: IP20.
Weight: Approx. 410 g.

Features:

Intuitive operation with a large, high-contrast LED display.
Foil-protected front panel for durability.
DIN case 96 x 48 mm for panel mounting.
Compatible with all 4-20 mA Analogline transducers, allowing for long cable runs.
VacuGraph software for documentation, evaluation, and remote control.
Customizable configuration according to customer requirements.

Accessories:

VacuGraph™ software for enhanced process control.
PC cable USB, shielded, 2 m for connectivity.

Model Designations:

VD6S2115: For mains supply 115 VAC/ 3.5W.
VD6S2230: For mains supply 230 VAC/ 3.5W.

Sets:

P_VD62230: Set 230 V, includes controller VD6S2230, transducer VSC43MA4, and measuring cable 2 m.
P_VD64230: Set 230 V, includes controller VD6S2230, transducer VSP63MA4, and measuring cable 2 m.

Catalog excerpts

VD6 - Analogline 1 Channel Vacuum Controller Features of the Analogline Controller VD6 n 1 measuring channel Can be used with all 4-20 mA Analogline transducers, consequently long cable runs possible Intuitive operation Large, high-contrast LED-display 2 potential-free relay switches Foil-protected front panel DIN case 96 x 48 mm for panel mounting Adjustable gas type correction factor USB interface for process documentation and setpoint programming VacuGraph software: Documentation and evaluation of vacuum processes, programming set points and remote control On demand the controller can be configured ex works according to the customer‘s requirements Pressure display either in mbar or Torr

Open the catalog to page 1

VD6 - Analogline 1 Channel Vacuum Controller Technical Data Suitable Vacuum Transducers VCC200MA4, VSC43MA4, VSP63MA4 ______________________________________________________________________________________________________________ Display LED, 13 mm, max. 4 1/2 digits, display unit mbar (Torr on request) ______________________________________________________________________________________________________________ Display Refresh Rate 2 Hz (0.5 s) ______________________________________________________________________________________________________________ Sample Rate 20 Hz (50 ms) ______________________________________________________________________________________________________________...

Open the catalog to page 2

VD6 - Analogline 1 Channel Vacuum Controller Model designations VD6S2115 For mains supply 115 VAC/ 3.5W VD6S2230 For mains supply 230 VAC/ 3.5W P_VD62230 (1400 - 1 mbar) Set 230 V, consisting of controller VD6S2230, transducer VSC43MA4 and measuring cable 2 m P_VD64230 (1000 - 1 x 10-4 mbar) Set 230 V, consisting of controller VD6S2230, transducer VSP63MA4 and measuring cable 2 m VGR VacuGraph™ software WUSB0002 PC cable USB, shielded, 2 m

Open the catalog to page 3

All Thyracont Vacuum Instruments GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list