90° Peel Fixture Vantage Tensile Tester
1Pages

{{requestButtons}}

Catalog excerpts

90° Peel Fixture Vantage Tensile Tester - 1

More Than a Century of Testing Solutions Vantage Tensile Tester The 90° Peel Fixture extends the versatility of a Universal Materials Tester. It is used for test procedures which require maintaining a constant right angle between the adhesive sample and the rigid test surface. A portion of the adhesive sample is attached to the sample plate while the free end is secured by the upper grip. When a test is initiated, the grip peels the sample from the plate. The sample plate and the sample table move at the same rate so that the 90° angle is maintained throughout the test. The standard fixture is configured with a grip extension to fit the lower grip adapter and comes complete with six stainless steel sample plates, a moving sample table, sample support lower guide and a sample support pulley which slides the plate to maintain a 90° angle. Moving Sample Table Sample Support Pulley Sample Plate Industry Standards Grip Extension ■ ASTM D6252 Sample Support Lower Guide Thwing-Albert Instrument Company 14 W. Collings Avenue, West Berlin, NJ 08091, USA tel 856-767-1000  fax 856-767-2615  info@thwingalbert.com

Open the catalog to page 1

All THWING-ALBERT Europe catalogs and technical brochures

  1. Vantage NX

    4 Pages