Technical Specifications Overview

This document provides detailed technical specifications for the SC-55 conveyor model manufactured by Thor Global Enterprises Ltd. It includes key parameters such as belt width, capacity, and various dimensional measurements.

Model and Capacity

• Model: SC-55
• Belt Width: Up to 48 inches
• Capacity: Up to 1500 STPH (Short Tons Per Hour)

Dimensional Specifications

The document lists multiple sets of dimensions labeled A, B, C, and D, which correspond to different parts or configurations of the conveyor system. These dimensions are approximate and may vary:

• Set 1: A = 55' - 1", B = 10' - 4", C = 10' - 5", D = 8' - 4"
• Set 2: A = 55' - 1", B = 6' - 0", C = 7' - 2", D = 7' - 4"
• Set 3 (Travel Width): A = 10' - 5", B = 55' - 8", C = 12' - 10", D = 40' - 7"

Conveyor Sections

The document references different conveyor sections such as Top/Middle Conveyor and Bottom Conveyor, with labels like 1A, 2B, 2A, 1B, and dimensions A, B, C, D associated with these sections. These likely correspond to specific parts or assembly points within the conveyor system.

Manufacturer Information

• Company: Thor Global Enterprises Ltd.
• Address: 839 Westport Crescent, Mississauga, Ontario, Canada L5T 1E7
• Contact: Tel: 905-564-0440, Fax: 905-564-9602, Toll Free: 1-888-801-THOR (8467)
• Website: www.thor-global.com

Notes and Limitations

All sizes and dimensions are approximate. Thor Global Enterprises Ltd. reserves the right to make changes to their products at any time without notification. This implies that the specifications provided should be verified before final design or procurement decisions.

Summary of Critical Parameters

• Maximum belt width: 48 inches
• Maximum capacity: 1500 STPH
• Key dimensional ranges for length and width vary between approximately 6 feet to 55 feet depending on the section
• Multiple conveyor sections with specific dimensional references for assembly or installation

Best Practices and Recommendations

While not explicitly stated, the document implies the importance of verifying dimensions and capacities with the manufacturer due to possible changes. Proper identification of conveyor sections and their dimensions is critical for installation and maintenance.