Max Jac® Electric Linear Actuators Heavy Duty IP69K Actuator for the Toughest Conditions

introduction The ThOrnsOnMax Jac® linear actuator is the result of decades of extensive success in making linear y actuators for the mobile-off-highway market. The Max Jac is built to work virtually The Max Jac maintenance-free in environments where is not only tough it encounters fertilizers, mud, sand, high but also a high pressure water jets, slush, salt water, performer that delivers snow, heat or heavy vibrations. high speed, efficiency, and accuracy in a compact envelope. Like all Thomson linear actuators, the Max Jac can easily be customized to match your application's requirements.

Max Jac® Heavy Duty Linear Actuator State of the art technology and the best materials available make the Max Jac strong and reliable within a lightweight package. The Max Jac has undergone rigorous testing throughout the entire development process to ensure that it will deliver trouble free operation, long life, and outstanding performance in demanding environments. Hard-coat Anodized Aluminium Cover Tube • Long life • High speed • High efficiency • Small envelope • Minimal backlash • Vibration resistant • Short total length versus stroke • High degree corrosion protection • High accuracy position...

Features and Benefits The Max Jac® can be used in many types of applications, but it excels when used under the harshest conditions. Every aspect of the actuator has been designed to ensure longevity, reliability, and performance. Let the Max Jac Work in Dust, Dirt, and Mud... The Max Jac electric linear actuator is designed to endure the harshest environments. It is rated for IP66/IP69K and has been tested for 500 hours of salt spray. It withstands dirt, dust and water, and also aggressive substances such as fertilizers, acid, oil, grease, and cleaning agents. ... in Arctic to Desert Temperatures...

Max Jac® Heavy Duty Linear Actuator The Max Jac is the best overall choice among actuators when designing for demanding applications. It offers the following advantages: • Shortest overall length versus stroke • Fastest among its peers • Resistant against vibration and impacts • Largest operating temperature range • Possibility to work at 100% duty cycle • Long and completely maintenance free life. The Max Jac can be equipped with two kinds of position feedback options that fit in to the standard housing without adding to the outer dimensions: • Analog position output signal • Digital encoder...

Performance Specifications (1) The static force (i.e. the back-driving force) for a ball screw unit varies and is dependent on the number of cycles it has been running and at which loads. (2) Strokes possible for ball screw models only. (3) For ball screw actuator with 100 mm stroke, average load of 500 N and changing load direction. Standard Features and Benefits • Designed for industrial applications • Rugged aluminum housing with IP69K • High efficiency • Long life • Hard coat anodizing for high corrosion resistance • Virtually maintenance free • Worm or ball screw models • Non-contact analog...

Max Jac® Heavy Duty Linear Actuator * Strokes possible for ball screw models only. Performance Diagrams Worm Screw Models (MX • • W) Speed [mm/s] Current [A] 1. Actuator type and supply voltage MX12- = Max Jac 12 VDC MX24- = Max Jac 24 VDC 2. Max. dynamic load, screw type and max. speed B8 = 800 N, ball screw, 55 mm/s 4. Position feedback option P = analog signal (standard) E = encoder signal 0 = 300 mm long flying leads 1 = 300 mm long cable and connector ** 2 = 1600 mm long cable and connector ** AMP Super seal series 1.5 connector * Strokes possible for ball screw models only,

Contact us or any of our 2000+ global distribution partners by scanning the code below or visiting www.thomsonlinear.com/contact www.regalrexnord.com www.thomsonlinear.com Max_Jac_BRUK-0003-05 | 20260218KB | MCB-12402-TL-EN-A4 02/26 Specifications are subject to change without notice. It is the responsibility of the product user to determine the suitability of this product for a specific application. All trademarks property of their respective owners. ©2026 Thomson Industries, Inc. | 2400 Curtiss Street, Downers Grove, IL 60515 USA