The Next Generation of Throttle Control Technology www.thomsonlinear.com A REGAL REXNORD BRAND

Introducing the Thomson Electrak® Throttle Actuator Transforming throttle control through innovative design Thomson has taken the rugged, dependable features of the E050 Electrak actuator and added capabilities making the throttle actuator an ideal solution for industrial vehicles where throttle control is required. It offers: • Trusted performance • Simplified installation • Space-saving design • Reduced environmental impact • Minimal maintenance Simplify installation and increase operator safety and productivity with the space-saving design and electromechanical interface, allowing engine speed...

Electrak® Throttle Control Actuator The Electrak Throttle Actuator at a Glance The Electrak Throttle actuator was developed to be the most robust, reliable, and versatile actuator for throttle control applications. Enjoy a simpler and more efficient vehicle design process with the following product innovations: Space Saving Design Self Locking Lead Screw Minimal Maintenance Stainless Steel Extension Tube Anodized Aluminum Adapter IP69K Protection Class Analog Position Feedback Sensor, Electronic Limit Switch or CANBUS Options Built In End of Stroke and Mid Stroke Protection Applications •7 Agricultural...

Specifications Standard Features and Benefits • Designed for industrial applications • Rugged aluminum housing with IP69K/IP67 sealing • E-coated housing for corrosion resistance • Minimal maintenance • Integrated electronic options • High end features at a low cost • Integrated mounting holes (1) The ET* • -084 (high speed version) can only be ordered in combination with operating temperature rating E. (2) Max. current draw ratings do not include motor inrush current. Typical inrush current values are 12 A at 12 VDC and 6 A at 24 VDC. (3) For all models and load ranges.

Electrak® Throttle Control Actuator Dimensions and Performance Diagrams METRIC [INCH] Performance Diagrams ET••-084 Speed [mm/s]

Electrical Installation Cable and Connector Installation Connect the actuator according to the table below. Actuator will extend if connected as in the table, shift polarity between red (pin 1) and black (pin 3) leads and it will retract. Mating Deutsch connector kit can be ordered from Thomson (P/N 9100-448-021). Note: Connector pin 2 is not used, but contains a sealing plug. Lead color or Deutsch DTM04-6P connector pin number Option name and order key code Red (1) Analog position feedback sensor (NP) End of stroke limit switches (FN) Analog position feedback sensor and limit switches (FP) Deutsch...

Electrak® Throttle Control Actuator 1. Actuator type and supply voltage ET12- = Electrak Throttle, 12 VDC ET24- = Electrak Throttle, 24 VDC 4. Temperature rating S = standard: -40 (-40) to +85 (+185) °C (F) NP = analog position feedback sensor FN = end of stroke limit switches FP = analog position feedback sensor and end of stroke limit switches CN = CANBUS SAE J1939 7. Adapter options S = standard adapter orientation M = adapter rotated 90° 2. Max. dynamic load and speed version 084- = 45 N (10 lbf), high speed (1) 3. Harness orientation S = parallel to adapter (1) Can only be ordered with high...

Contact us or any of our 2000+ global distribution partners by scanning the code below or visiting www.thomsonlinear.com/contact www.regalrexnord.com www.thomsonlinear.com Electrak_Throttle_Actuator_BRUK-0006-05 | 20260217KB | MCB-12400-TL-EN-A4 02/26 Specifications are subject to change without notice. It is the responsibility of the product user to determine the suitability of this product for a specific application. All trademarks property of their respective owners. ©2026 Thomson Industries, Inc. | 2400 Curtiss Street, Downers Grove, IL 60515 USA