1. Catalogs
  2. Thompson Pump
  3. 6TSC-DJCST-423-M

6TSC-DJCST-423-M

6TSC-DJCST-423-M

6TSC-DJCST-423-M

Product catalog summary
Overview: The 6” Compressor-Assisted Trash Pump, model 6TSC-DJCST-423-M by Thompson Pump and Manufacturing Co., Inc., is designed for efficient operation in construction, industrial, and wastewater applications. It features a heavy-duty cast-iron construction and is capable of handling spherical solids up to 3 inches, making it suitable for sewage bypass pumping and general construction dewatering.
Materials and Construction: The pump casing is made of heavy-duty class 30 cast iron with a built-in volute. The impeller is dynamically balanced, two-vane, non-clogging, and semi-open, made of ductile iron with rear-equalizing vanes to reduce axial loading. The mechanical seal is grease or oil lubricated with tungsten carbide rotating and stationary seal faces. Other components include 304 stainless steel and Viton. The head features a rugged, back pull-out design, and the bearings and frame are heavy-duty, grease-lubricated, and made of class 30 cast iron.
Technical Specifications: The pump has a suction and discharge size of 6 inches, a maximum operating pressure of 64.94 psi, and a maximum flow capacity of 1460 gpm. It can operate at a maximum speed of 2200 rpm and handle a maximum head of 150 feet. The maximum operating temperature is 200°F. The fuel tank capacity is 100 gallons, with fuel consumption rates varying based on rpm.
ENVIROPRIME SYSTEM®: This innovative priming system prevents the discharge of sewage, effluent, and waste onto the ground. It includes a compressor priming system for quick priming and mid-range air handling capabilities.
Engine Specifications: The pump is powered by a JCB TCAE55 engine, which is a 4-cylinder, in-line, 4-cycle, water-cooled, turbo-charged, direct-injected, Final Tier IV diesel engine. It includes standard equipment such as an alternator, radiator, electronic governor, and recirculation system. Automatic shutdowns are triggered by low oil pressure and high coolant temperature.
Additional Information: Specifications and illustrations are subject to revision without notice. Thompson Pump makes no representation regarding the completeness or accuracy of the information and is not liable for any damages arising from its use. For exact capabilities, consult the Thompson factory.
See more

Catalog excerpts

6TSC-DJCST-423-M-1

6” Compressor-Assisted Trash Pump Model: 6TSC-DJCST-423-M With its final er 4 engine, heavy‐duty cast‐iron construc on, alternate self‐priming and wet priming capability, this trash pump works efficiently in construc on, industrial and wastewater applica ons. The Thompson 6TSC‐ DJCST‐423‐M ENVIROPRIME® Trash Pump is designed for moderate flows and heads to 150 feet and can handle spherical solids to 3” making it perfect for sewage bypass pumping or general construc on dewatering. ENVIROPRIME SYSTEM® with Compressor  Thompson’s innova ve priming system preven ng blow‐by of sewage, effluent and waste from discharging onto the ground. This system, with Thompson’s compressor priming system, offers mid‐range air handling ca‐ pabili es for quick priming. Materials Pump Casing Impeller Dynamically balanced, two‐vane, non‐clogging, semi‐open with full rear shroud, duc le iron with rear‐equalizing vanes to re‐ duce axial loading and prolong seal and bearing life; Diameter 11.25” Grease or oil lubricated with Tungsten Carbide rota ng and sta onary seal faces. Single inside mounted, non‐pusher type with self‐adjus ng elastomeric bellows. Other components are 304 stainless steel and Viton. Consult factory for other versions & options including site trailers, sound attenuation, etc. TECHNICAL SPECIFICIATIONS Suction Size Maximum Operating Pressure Discharge Size Fuel Tank Maximum Flow Capacity Maximum Head Maximum Operating Times Fuel Economy Maximum Solids Handling Maximum Operating Speed

 Open the catalog to page 1
6TSC-DJCST-423-M-2

4-cylinder, in-line, 4-cycle, water-cooled, turbocharged, direct-injected, Final Tier IV diesel Automatic Shutdowns Standard Equipment Low oil pressure; high coolant temperature Alternator, radiator, electronic governor, recirculation system Specifications and illustrations are subject to revision without notice and without incurring any obligation for previous or subsequent equipment sold. Thompson Pump (ISO 9001:2008) makes no representation regarding the completeness or accuracy of this information and is not liable for any direct or indirect damages arising from or relating to this information...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.