6” Solids Handling Vacuum-Assisted Jet Pump Model: 6JSVD-DJDST-45H-M With its heavy-duty cast-iron construction and fast priming capabilities, this Super Suction solids handling jet pump leads the industry in construction, industrial and mining applications. The Thompson 6JSVD-DJDST-45HM is designed for high flows to 1,420 gpm and heads to 440 feet making it perfect for sewage bypass pumping or general construction dewatering. ENVIROPRIME SYSTEM® with OVT Thompson’s innovative priming system preventing blow-by of sewage, effluent and waste from discharging onto the ground. This system, with Thompson’s OVT system, offers 97 SCFM air handling capabilities for quick priming. Materials Heavy-duty class 30 cast-iron Pump Casing Impeller Mechanical Seal Head Consult factory for other versions & options including site trailers, sound attenuation, etc. Dynamically balanced, non-clogging, enclosed, 65-4512 ductile iron, with rear-equalizing vanes to reduce axial loading and prolong seal and bearing life; diameter 14” 2.5” run-dry, oil or grease lubricated with Tungsten Carbide rotating and Silicon Carbide stationary seal faces. Single inside mounted, non-pusher type with self-adjusting elastomeric bellows. All other components are 304 stainless steel and viton. Rugged, back pull out design, heavy-duty class 30 cast iron with tapered bore design Bearings & Frame Heavy-duty grease lubricated to carry both axial and radial loads. Frame is heavy-duty class 30 cast-iron High quality ‘stress-proof’ steel and fitted with a renewShaft able 416 stainless steel sleeve TECHNICAL SPECIFICIATIONS Suction Size Discharge Size Fuel Tank Maximum Flow Capacity Maximum Head Best Efficiency Point Maximum Solids Handling Maximum Operating Times Fuel Economy Maximum Operating Speed Maximum Operating Temp. Maximum Operating Pressure 190 psi (1313 kPa) Thompson Pump and Manufacturing Co., Inc. 4620 City Center Drive, Port Orange, FL 32129 USA www.thompsonpump.com Nationwide 800-767-7310 • International 011-386-767-7310 Fax 386-761-0362 sales

Engine Specification Specifications and illustrations are subject to revision without notice and without incurring any obligation for previous or subsequent equipment sold. Thompson Pump makes no representation regarding the completeness or accuracy of this information and is not liable for any direct or indirect damages arising from or relating to this information or its use. Capacity & Head are shown for comparative purposes. Consult Thompson factory for exact capabilities.