Catalogs >
Thompson Pump >
18JSVK-DJDS-90H-MC

18JSVK-DJDS-90H-MC
2Pages

Catalog excerpts

With its heavy-duty cast-iron construction and fast priming capabilities, this solids handling jet pump leads the industry in construction, industrial and municipal applications. The Thompson 18JSVK-DJDS-90H-MC is designed for high flows to 11,500 gpm and heads to 146 feet making it perfect for sewage bypass pumping or general construction dewatering. ENVIROPRIME SYSTEM® with OVT  Thompson’s innova ve priming system preven ng blow‐by of sew‐ age, eﬄuent and waste from discharging onto the ground. This sys‐ tem, with Thompson’s OVT system, oﬀers 97 SCFM air handling ca‐ pabili es for quick priming. Pump End Materials Heavy-duty class 30 cast-iron with replaceable wear ring Pump Casing Impeller Dynamically balanced, non-clogging, enclosed, class 30 cast iron with rear-equalizing vanes to reduce axial loading and prolong seal and bearing life; Diameter 17.5” Mechanical Seal 3” dry-running, oil or grease lubricated with Tungsten Carbide rotating and Silicon Carbide stationary seal faces. Single inside mounted, non-pusher type with self-adjusting elastomeric bellows. Other components are 304 stainless steel and Viton. Rugged, back pull out design, heavy-duty class 30 cast iron with tapered bore design. Consult factory for other versions & options including site trailers, sound attenuation, etc. Bearings & Frame Shaft Heavy-duty grease lubricated to carry both axial and radial loads. Frame, heavy-duty class 30 cast iron ‘Stress-proof’ steel and fitted with a renewable 416 stainless steel shaft sleeve TECHNICAL SPECIFICIATIONS Suction Size Discharge Size Fuel Tank Maximum Flow Capacity Maximum Head Best Efficiency Point Maximum Solids Handling Maximum Operating Times Fuel Economy Maximum Operating Speed Maximum Operating Temp. Maximum Operating Pressure 63 psi (436 kPa) Thompson Pump and Manufacturing Co., Inc. 4620 City Center Drive, Port Orange, FL 32129 USA www.thompsonpump.com

Open the catalog to page 1

Engine Specification Engine Model John Deere 6090H, 300 hp @ 1,800 rpm 6-cylinder, in-line, 4-cycle, water-cooled, turbo charged, direct-injected, Tier III diesel Standard Equipment Alternator, radiator, muffler and exhaust stack with rain protection Automatic Shutdowns Low oil pressure; High coolant temperature Specifications and illustrations are subject to revision without notice and without incurring any obligation for previous or subsequent equipment sold. Thompson Pump (ISO 9001:2008) makes no representation regarding the completeness or accuracy of this information and is not liable...

Open the catalog to page 2

18JSVK-DJDS-90H-MC 2Pages

Catalog excerpts

All Thompson Pump catalogs and technical brochures

18JSVK-DJDS-90H-MC
2Pages