Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. THOMAS WELDING SYSTEMS
  3. NOMARK 66 : Capacitors Discharge studs welder
video corpo

NOMARK 66 : Capacitors Discharge studs welder

NOMARK 66 : Capacitors Discharge studs welder
1 / 1 PageView full catalog

NOMARK 66 : Capacitors Discharge studs welder

Product catalog summary
Overview: The NOMARK 66 is a new line of capacitor discharge stud welding equipment designed for high efficiency, portability, and safety. It features a compact design with LED function monitoring and short charging cycles to enhance productivity.
Specifications:
  • Welding Range: M3 - M8 in Steel and Stainless Steel; M3 - M6 in Aluminum and Brass.
  • Welding Source: Capacitor battery.
  • Welding Process: "Gap" and "Contact".
  • Capacitance: 66,000 µF.
  • Charging Voltage: 50 - 200 V (Bi-directional).
  • Digital Voltmeter: Yes.
  • Welding Time: 0.001 - 0.003 sec.
  • Duty Cycle: Up to 25 studs/min.
  • Output Power: 1,320 Ws.
  • Mains Supply: 230 V - 50/60 Hz - 10 AT.
  • Size: 165 x 250 x 380 mm.
  • Protection: IP 23.
  • Insulation Class: 1.
  • Weight: 12.5 Kg.
Gun Specifications:
  • Models: Gun G1 and C1.
  • Welding Range: M3 to M8.
  • Stud Length Range: 6 to 40 mm.
  • Nail Length Range: 6 to 100 mm.
  • Welding Process: G1 gun uses Gap; C1 gun uses Contact.
  • Lift Settings (G1): Infinitely adjustable.
  • Spring Settings (C1): Infinitely adjustable.
  • Cable Length: G1: 3 meters; C1: 5 meters.
  • Cable Section: 25 mm².
  • Protection: IP 2x.
  • Weight (without cable): G1: 0.7 Kg; C1: 0.6 Kg.
Accessories:
  • Template Tube Ø 30 mm.
  • Extension Kit for studs longer than 40 mm.
  • Silence Tube Ø 35 mm.
  • Chuck Offset.
  • Tube for Template Ø 20, 26, and 30 mm.
Contact Information: ZI, 3ème RUE B. 6040 JUMET. Tel: +32.71.91.97.60. Fax: +32.71.91.96.71. Web: www.thomas-welding.com. Email: [email protected].
Note: Technical data may change without prior notice.
See more

Catalog excerpts

NOMARK 66 : Capacitors Discharge studs welder-1

table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:7.00pt "Arial", sans-serif; } .font1 { font:8.00pt "Arial", sans-serif; } .font2 { font:9.00pt "Arial", sans-serif; } .font3 { font:11.00pt "Arial", sans-serif; } .font4 { font:17.00pt "Arial", sans-serif; } .font5 { font:23.00pt "Arial", sans-serif; } Capacitor discharge stud welding equipment : NOMARK 66 This new line of stud welding equipments meets the highest requirements due to operating convenience, low weight, high efficiency, compact design and absolute safety. The monitoring of all functions is clearly displayed by LED on the front panel. The short charging cycles increase productivity. Lightweight and easily portable, the NOMARK 66 weighs in at around half of many other conventional studwelding equipments. The NOMARK 66 is our capacitor discharge stud welding system that is lightest in weight and lowest in cost. Welding Range M3 - M8 (in Steel and Stainless Steel) M3 - M6 (in Aluminum and Brass) Welding source Capacitor battery Welding process "Gap" and "Contact" Capacitance 66.000 |jF Charging Voltage 50 - 200 V (Bi-directional) Digital Voltmeter Yes Welding time 0,001 - 0,003 sec. Duty cycle Up to 25 studs / min Output power 1.320 Ws Mains supply 230 V - 50 / 60 Hz - 10 AT Size (w x h x l) 165 x 250 x 380 mm Protection IP 23 Insulation Class 1 Weight 12,5 Kg Gun G1 or C1 Welding range Stud Length range Nail length range Welding process Lift settings (for G1) Spring settings (for C1) Cables length Cables Section: Protection Weight (without cable) M 3 to M 8 6 to 40 mm 6 to 100 mm G1 gun : Gap C1 gun : Contact Infinitely adjustable Infinitely adjustable Gun G1 : 3 meters Gun C1 : 5 meters 25 mm2 IP 2x G1 : 0,7 Kg. C1 : 0,6 Kg. Accessories : Template Tube 0 30 mm Extension Kit for studs longer than 40 mm Silence Tube 0 35 mm Chuck Offset Tube for Template 0 20, 26 et 30 mm. ZI, 3me RUE TEL : + 32.71.91.97.60 Web : E-Mail: B. 6040 JUMET FAX : + 32.71.91.96.71 www.thomas-welding.com [email protected] Technical data may change without prior notice

 Open the catalog to page 1

All THOMAS WELDING SYSTEMS catalogs and technical brochures

  1. COMPACT 1000i Digital
    COMPACT 1000i Digital

    1  Page

  2. COMPACT 500i
    COMPACT 500i

    1  Page

  3. COMPACT 300i
    COMPACT 300i

    1  Page

  4. NOMARK 10
    NOMARK 10

    1  Page

  5. NOMARK 88
    NOMARK 88

    1  Page

  6. NOMARK 66
    NOMARK 66

    1  Page

  7. COMPACT 1400
    COMPACT 1400

    1  Page

  8. COMPACT 900
    COMPACT 900

    1  Page

  9. NOMARK 90 CD Studs welder
    NOMARK 90 CD Studs welder

    1  Page

  10. Compact 700i / 1000i Inverter Drawn Arc studs welders
    Compact 700i / 1000i Inverter Drawn Arc studs welders

    1  Page

  11. Compact 1400i Inverter Drawn Arc studs welders
    Compact 1400i Inverter Drawn Arc studs welders

    1  Page

  12. MICROMARK Drawn Arc Studs welder
    MICROMARK Drawn Arc Studs welder

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.