25 GT specification august 23 2012
3Pages

25GT SPECIFICATIONS PERFORMANCE Operating Capacity 50% of Tipping, lb. (kg) Operating Capacity 35% of Tipping, lb. (kg) Tipping Load, lb. (kg) Travel Speed, Inching Range, mph (km/h) Travel Speed, Low Range, mph (kmh) Travel Speed, High Range, mph (km/h) Travel Speed, Max. High Range, mph (km/h) Shipping Weight, lb. (kg) Operating Weight, lb. (kg) ENGINE Make Model Horsepower Net, HP (kw) Horsepower (Gross), HP (kw) Max. Gov. Speed, rpm Max. Torque, ft.lb. (kg/m) No. Cylinders Displacement, cu.in. (cu. cm) Cooling System Fuel Type Fuel Capacity, gal.(L) ELECTRICAL Ignition Battery, CCA Alternater, Amps Glow Plugs Standard Head Light, Std. 12 Volt Accessory Plug, Std. CONTROLS Steering Controls Two-Hand Levers Hydraulic Controls Single Joystick Aux. Hyd. Circuit #1 Aux. Hyd. Circuit #2 Parking Brake, Auto Engagement DRIVE SYSTEM Drive Pump Drive Type Final Drive Chain Single lever Single lever Yes Gear Motor/Track No. 60HT Chain Specifications and design are subject to change without notice. Specifications may vary depending on country.

25GT SPECIFICATIONS HYDRAULICS Pump Capacity, GPM (LPM) High Flow Pump Output, GPM (LPM) System Relief Pressure, PSI (BAR) Total Hydraulic Flow, gpm (lpm) Aux. Circuit Equipped With Cylinder Spool Aux. Circuit Equipped With Motor Spool Selector Valve, Standard. Combiner Valve, Standard Flow Control Valve, Standard Breakout Force - Tilt, lb (kg) Breakout Force - Boom, lb (kg) No. Boom Cylinders Self Leveling Bucket Standard Hydraulic Reservoir Capacity, gal. (L) Filtration Hydraulic Oil Cooler w/Fan, Standard Oil Type OPERATION Standard Tires Standard Track Width, in (mm) Optional Track...

25GT SPECIFICATIONS DIMENSIONS Overall Operating Height, in. (mm) Height To Hinge Pin, in (mm) Overall Height of Vehicle, in (mm) Overall Length with Bucket, in (mm) Dump Angle Dump Height, in (mm) Reach - Fully Raised, in (mm) Height at 45 Deg. Dump Angle, in (mm) Reach at 45 Deg. Dump Angle, in (mm) Max. Roll Back at Ground Max. Roll Back Fully Raised Wheelbase, in (mm) Overall Length - Less Bucket, in (mm) Ground Clearance, in (mm) Max. Grading Angle - Bucket Angle of Departure Bucket Width, in (mm) Clearance Circle Front, in (mm) Clearance Circle Front w/Bucket, in (mm) Clearance Circle...