The Flexible Adjustable Wiper Flexible Adjustable Simple Mounting

The Flexible Adjustable Wiper Present Way Wipers are equipped with long holes to adjust the preload of the wiper lip of Way Wipers in relation to the wiped surface. This requires a complicated production method, because the long holes need to be milled. This can be solved mutch easier with thodacon’s new flexiPLUG. Flexible Adjustable Thodacon flexiPLUG can be rotated by 360° in its central hole. It can be turned with an ordinary screw driver or with the specially developed Mounting Device (available separately) to put the long hole in the desired angle. The adjustable angle of the long hole...

The Flexible Adjustable Wiper Replaceable Also existing way wipers with fixing holes can be upgraded to the new flexiPLUG solution, by simply drilling a bigger hole into the existing onem, adding a chamfer with a countersinker and finally attaching the flexiPLUG. Simple Mounting Thodacon’s flexiPLUG is easy to install. Installation is even possible on site of the machine with simple tools. Required is a hand drilling machine with corresponding spiral drill and a countersinker. For installing, simply mark the desired position, (pay attention to the required pre load), drill the hole and finish...

thnriannn www.thodacon.com Thodacon Werkzeugmaschinenschutz GmbH Machine Tool Protection Co., Ltd. Copyright 03/2017 - Anderungen vorbehalten