Linear Motor Actuators Model GLM10,15,25
49Pages

Precautions on Use Environment Safety Precautions • Do not drop or knock this product. Doing so may cause injury or damage the unit. • Unnecessarily disassembling this product may allow foreign objects to enter and reduce functionality. Also, there is a risk of electric shock from the driver. • The PL seal is attached to the end plate of the unit body. If the user has selected a unit option without an end plate, no PL seal will be attached. Therefore, the user must prepare his own PL seal. • The magnet plate (stator) is a very powerful magnet. Keep magnetic bodies (particularly metals) away from the magnet plate. There is a risk of getting the finger(s) jammed between the metal body and the magnet due to the attractive force of the magnet. Also, persons using cardiac pacemakers should absolutely stay away from the magnet. • Never touch the moving section of the actuator when it is energized. Also, when the product is in motion, or in a state of readiness for motion, do not enter the movement zone of the actuator. • When carrying out installation, adjustment, inspection or maintenance of the actuator unit, driver or connected associated devices, always remove all plugs from the power sockets, and use locking or safety plugs etc. so that no one but an operator can turn on the power again. Also, display a notice explaining what work is in progress in a position that is readily seen. • If two or more people are involved in the operation, confirm the procedures such as sequences, signs, and abnormalities in advance, and appoint another person for monitoring the operation. • Read the manual carefully, understanding the content properly, and be sure to observe all safety precautions. GL M 10, 15, 20, 25 The wrong environment can cause failure for the actuator and driver. The best places to use the device are as follows: • For actuators, an environment with a room and ambient temperature from 0 to 40 °C and humidity of no more than 80% RH that will not expose the product to freezing or condensation. • For drivers, an environment with a room and ambient temperature from 0 to 50 °C and humidity of no more than 90% RH that will not expose the product to freezing or condensation. • A place free from corrosive gas or flammable gas. • Places where none of the following are flying around: iron particles, or any other conductive particles, dust, oil mist, cutting fluid, water, salt, organic solvents. • Places that are not exposed to direct sunlight or radiant heat. • Places where no strong electric fields or strong magnetic fields occur. • Places where vibration or impact are not transmitted to the unit. • Places that are easy to inspect and clean. L in ear M otor Actu ators Linear Motor Actuators GLM10,15,20,25 Linear Motor Actuators GLM10,15,20,25 High-speed, low dust-generation and low noise have been achieved Dedicated driver has been developed ” are registered trademarks of THK CO., LTD. “LM GUIDE,” “Caged Ball,” and “ The actual products may differ from the pictures and photographs in this catalog. Outward appearances and specifications is subject to change without notification for purposes of improvement, please inquire before using them. Although great care has been taken in the production of this catalog, THK will not take any responsibility for damage resulting from typographical errors or omissions. In exporting our products and technology, or selling them for the purpose of export, THK has a basic policy of observing laws relating to foreign exchange, trade and other laws. For export of THK products as single items, contact THK in advance. All rights reserved HEAD OFFICE 3-11-6, NISHI-GOTANDA, SHINAGAWA-KU, TOKYO 141-8503 JAPAN INTERNATIONAL SALES DEPARTMENT PHONE:+81-3-5434-0351 FAX:+81-3-5434-0353 Global site : http://www.thk.com/ FRANKFURT OFFICE Phone:+49-2102-7425-650 STUTTGART OFFICE Phone:+49-7150-9199-0 MÜNCHEN OFFICE Phone:+49-8937-0616-0 U.K. OFFICE Phone:+44-1908-30-3050 ITALY MILANO OFFICE Phone:+39-039-284-2079 ITALY BOLOGNA OFFICE Phone:+39-051-641-2211 SWEDEN OFFICE Phone:+46-8-445-7630 AUSTRIA OFFICE Phone:+43-7229-51400 SPAIN OFFICE Phone:+34-93-652-5740 TURKEY OFFICE Phone:+90-216-362-4050 PRAGUE OFFICE Phone:+420-2-41025-100 THK Europe B.V. EINDHOVEN OFFICE Phone:+31-040-290-9500 THK France S.A.S. Phone:+33-4-3749-1400 Fax:+49-2102-7425-699 Fax:+49-7150-9199-888 Fax:+49-8937-0616-26 Fax:+44-1908-30-3070 Fax:+39-039-284-2527 Fax:+39-051-641-2230 Fax:+46-8-445-7639 Fax:+43-7229-51400-79 Fax:+34-93-652-5746 Fax:+90-216-569-7150 Fax:+420-2-41025-199 Fax:+31-040-290-9599 Fax:+33-4-3749-1401 CHINA THK (CHINA) CO.,LTD. HEADQUARTERS Phone:+86-411-8733-7111 Fax:+86-411-8733-7000 SHANGHAI OFFICE Phone:+86-21-6219-3000 Fax:+86-21-6219-9890 BEIJING OFFICE Phone:+86-10-8441-7277 Fax:+86-10-6590-3557 CHENGDU OFFICE Phone:+86-28-8526-8025 Fax:+86-28-8525-6357 GUANGZHOU OFFICE Phone:+86-20-8523-8418 Fax:+86-20-3801-0456 THK (SHANGHAI) CO.,LTD. Phone:+86-21-6275-5280 Fax:+86-21-6219-9890 TAIWAN THK TAIWAN CO.,LTD. TAIPEI HEAD OFFICE Phone:+886-2-2888-3818 Fax:+886-2-2888-3819 TAICHUNG OFFICE Phone:+886-4-2359-1505 Fax:+886-4-2359-1506 TAINAN OFFICE Fax:+886-6-289-7669 Phone:+886-6-289-7668 KOREA SEOUL REPRESENTATIVE OFFICE Fax:+82-2-3468-4353 Phone:+82-2-3468-4351 SINGAPORE THK LM SYSTEM Pte. Ltd. Phone:+65-6884-5500 Fax:+65-6884-5550 INDIA BANGALORE REPRESENTATIVE OFFICE Phone:+91-80-2330-1524 Fax:+91-80-2314-8226 ©THK CO., LTD. 200903003 E8 Printed in Japan UL Certified products & CE Marked products NORTH AMERICA THK America,Inc. HEADQUARTERS Phone:+1-847-310-1111 Fax:+1-847-310-1271 CHICAGO OFFICE Phone:+1-847-310-1111 Fax:+1-847-310-1182 NORTH EAST OFFICE Phone:+1-845-369-4035 Fax:+1-845-369-4909 ATLANTA OFFICE Phone:+1-770-840-7990 Fax:+1-770-840-7897 LOS ANGELES OFFICE Phone:+1-949-955-3145 Fax:+1-949-955-3149 SAN FRANCISCO OFFICE Phone:+1-925-455-8948 Fax:+1-925-455-8965 DETROIT OFFICE Phone:+1-248-858-9330 Fax:+1-248-858-9455 TORONTO OFFICE Phone:+1-905-820-7800 Fax:+1-905-820-7811 SOUTH AMERICA THK Brasil LTDA Phone:+55-11-3767-0100 Fax:+55-11-3767-0101 EUROPE THK GmbH EUROPEAN HEADQUARTERS Phone:+49-2102-7425-0 Fax:+49-2102-7425-217 DÜSSELDORF OFFICE Phone:+49-2102-7425-0 Fax:+49-2102-7425-299 UL Certified products & CE Marked products CATALOG No.339-4E-CU