Catalogs >
THK >
High Corrosion Resistance LM Guide Model HSR-M2

High Corrosion Resistance LM Guide Model HSR-M2
4Pages

Catalog excerpts

High Corrosion Resistance LM Guide Model HSR-M2 - 1

High Corrosion Resistance LM Guide Employing High Corrosion Resistance Stainless Steel for a Considerable Improvement in Corrosion Resistance High Corrosion Resistance LM Guide Standard Stainless Steel Guide Test conditions: 24 hours at different combinations of temperature and humidity (humidity: 95%, temperature: 25-65°C) x 8 cycles TOKYO. JAPAN

Open the catalog to page 1

High Corrosion Resistance LM Guide Model HSR-M2 - 2

High Corrosion Resistance LM Guide HSR-M2 Retainer plate Fig. 1 Structural Drawing of High Corrosion Resistance LM Guide Model HSR-M2A ■High Corrosion Resistance The LM rail, LM block and balls are made of highly corrosion resistant stainless steel and the other metal parts are made of stainless steel, allowing superb corrosion resistance to be achieved. As a result, the need for surface treatment is eliminated. ■Corrosion resistance test: Refer to the cover Note: For the high corrosion resistance type LM Guide, a stainless steel end plate is optionally available, (symbol— I )

Open the catalog to page 2

High Corrosion Resistance LM Guide Model HSR-M2 - 3

Radial clearance / Accuracy grade Standard and maximum lengths of LM rails The radial clearances of the high corrosion resistance LM Guide Model HSR-M2 are shown in Table 1. In addition, precision symbols are shown in Table 2. Table 1 Radial clearances Table 2 Accuracy Symbols Please refer to the general catalog for other details. Model number coding used on the same plane Symbol for LM rail jointed use Accuracy symbol (see Table 2) LM rail length (in mm) (see Table 3) End plate is made of stainless steel Radial clearance symbol (see Table 1 ) Contamination protection accessory symbol No....

Open the catalog to page 3

High Corrosion Resistance LM Guide Model HSR-M2 - 4

"Finirà High Corrosion Resistance LM Guide HSR-M2 * Please handle this product with care. Dropping of this product or subjecting to strong impacts can result in * Careless disassembly of this product can cause entry of foreign objects and deterioration of precision. Do not disassemble unless absolutely necessary. * Tilting the LM rail on an angle can cause the LM block to move and drop off. Be careful so that the LM block *Rated Load * Please note that the rated load of high corrosion resistance LM Guides is smaller than that of conventional stainless steel guides. *Working Temperature...

Open the catalog to page 4