TWJ 4020- TWJ 3317 [EN]
12Pages

3 or 5 axis Water jet cutting CENTER Straight, curved or inclined cut ...

TWJ 4020 / TWJ 3317 The purpose of this chapter is to give you technical and functional information on the machine as well as on the options and accessories. You will find in this document the different selected quantities and options. We are continuously improving the quality of our machines, the characteristics given in these pages may change at any moment and without previous notice. All the pictures and sketches of this document are used for information only. Machine frame containing the pump, the electric cabinet and the central greasing unit Heavy duty treated steel welded structure...

TWJ 4020 / TWJ 3317 Assets and exclusivity Using a waterjet system enables cutting of complex shapes in 2D flat materials with extreme accuracy. Some of the added benefits are: - Good finishing aspect of the workpieces cut, - No area affected by the heat, - Very little waste. Moreover, the waterjet is environment friendly. This machine was developed in partnership with a leading company with more than 25 years of experience in the manufacture of waterjet machines with very high pressure. Reliable, high efficiency machines with a modern design. Working table of large dimension Enables...

VERY HIGH PRESSURE PUMP EXCLUSIVE System TO ADJUST THE HEAD The VHP pump is integrated in the machine frame (back side) for a space optimization. It is entirely controlled by the NC. The pressure is variable from 500 to 4150 bar / 7250 to 60000 PSI via IHM (option 6000 bar / 87 000 PSI). This enables to drill with low pressure to avoid any splash or material breakage when jet is opened in full material. Then, the NC controls high pressure automatically. The cutting head (tool) is mounted on a mechanically adjustable support which enables to adjust the geometry of the head. This design...

Working capacity : • Length : up to 4050 mm / 159'' (TWJ4020) x axis (left-right movement) : • Longitudinal stroke -X axis 4050 mm /1 60'' (TWJ4020) or 3350 mm /132'' (TWJ3317) (mobile arm) Y axis (front-rear movement) : • Traverse stroke -Y axis 2050 mm / 80'' (TWJ4020) or 1750 mm / 69'' (TWJ3317) (mobile carriage) Z axis (vertical shifting) : • Vertical stroke -Z axis 200 mm /7.8 inches CNC controlled, including flatness controlling system (sensor) Pneumatic pressure : • The cutting tool is controlled by a pneumatic activating unit which starts and stops the jet • The pneumatic system is...

TECHNICAL FEATURES CUTTING table by E 40.20 ABRASIVE jET • Weight (at no-load) of the working surface : 1600 kg / 3527 pounds (TWJ4020) (without water). • 1120 kg / 2469 pounds (TWJ3317) (without water). • 6306 5064 TWJ4020 50 HP 'oEM' pump : Flow 3,78 l/min -1 galon/min up to 4150 bar/ 60 000 psi. design new generation. Delivered with starting panel, gauge, filtration booster pump (over water pump). Enough power to feed a with 0.35 mm nozzle (maxi). The pump is integrated in the frame of the machine and directly controlled by the CNC. It is completely covered with housing including its...

TWJ 4020 / TWJ 3317 Technical features SYSTEM OF WATER JET MIXTURE (Abrasive Version) : • The device is complete with a abrasive water jet mixture device for a correct proportioning of the sand (+/- 5 %). Abrasive proportioning system (SDA) Abrasive feeding jug (PAA) Cutting head 1 Tank under pressure (400 kg / 882 pounds). 1 proportioner type Feedline V with a control unit and proportioning of the cutting head abrasive flow. Possible adjustment during the cutting. 1 Auto- aligned cutting head IDE II. Pipes, air pressure reduction valve, manometer, pressure switch

Link-attached control board The control board can easily move to be positioned either on the right or the left hand of the machine to suit to your working site. Water softener type Simplex The machine is delivered with its own water treatment system (TH), including the supply of salt, installation and on site configuration. This system allows to lengthen the life duration of the pump and head. Depending on the results from the water test, an osmosis device can be necessary (not included). Front Protection (immaterial barriers) by photocell Side protection barriers prevent any access to the...

MANUAL (ON STANDARD MACHINE) The remote control enables to point piece origin and to consider templates. T'cuT : 2D 1/2 cutting software installed on a computer or on the machine: A software fully developed by THIBAuT. Take pictures of your slabs to detect and mark the defaults Do some vein matching to present your customer a unique realization before Create parametric shape or drawing Centra dc D4coupc par JkftiJ'Eaui Tf#* Hint* Pcotitin 4000 x 2000 x 200 mm - 5 axes Eau Pure ■ Eau Abrasive

TWJ 4020 / TWJ 3317 Options & accessories Automatic extraction system of the SEBA abrasive muds Machine tank Complete system with water recirculation, including in the bottom of the tank high flow muds suction and discharge pipes system, a high flow mud suction pump, one or two sedimentation tanks with filters type big-bag and stainless steel extractor for filtrated water, one pump for the recirculation of decantedwater and 1 system of water level control in the recovery tank. One suction jet tube allows to completely empty the system. Geometric Control (upon request) The machine is «...

TWJ 4020 / TWJ 3317 DECORATION / MARQUETRY APPLICATION

machines range