Die-Cut Patch Formats

The document lists numerous die-cut patch formats identified by letter codes (e.g., T, K, N, I, J, U, AB, etc.), each defined by specific dimensions in millimeters and packaging units ranging from 200 to 1,000 pieces per pack. These patches are intended for textile repairs and marking applications.

Ordering Instructions

All orders must be submitted in writing, a requirement emphasized in multiple languages to ensure clarity for international customers. Precise specification of patch format, color number, and width (for roll materials) is mandatory due to the custom nature of the products.

Color Card and Material Composition

The document details fabric types and their compositions used for patches and tapes:

• 100% Cotton Twill: Suitable for repairing workwear and similar textiles.
• 65/35% Polyester/Cotton Twill: Used for workwear repair and symbol marking.
• 100% Cotton Linen Weave: Designed for flat textiles such as surgical laundry and bed linens.
• 65/35% Polyester/Cotton Patch Tape: Intended for repair and symbol identification on professional clothing.

Colors are approximate; original samples can be requested for accurate matching.

Marking Tapes and Printing Compatibility

The document describes two main marking tape types:

• CK Marking Tapes: Compatible with dot-matrix printing systems.
• CT Marking Tapes: Exclusively for thermal transfer printing systems.

Special materials (SO series) are also available for specific applications.

Fabric and Ribbon Types

• Nylon Taffeta Tapes (NT series): Offered in multiple colors.
• Polyester Satin Tapes (PS series): Quality PS12 available in 24 colors, suitable only for thermal transfer printers.

Processing Instructions

• Heat-Seal Time: 10–12 seconds for lightweight patches; 15–18 seconds for heavy-duty patches.
• Temperature: Between 204°C and 210°C.

Material composition codes are defined as follows:

• C = 100% Cotton
• PC = 65/35% Polyester/Cotton
• P = 100% Polyester
• SO = Special materials

Important Notes and Limitations

• All colors shown are available as roll goods in various widths and as patches in all formats.
• Customers must carefully verify format, color number, and width before ordering.
• Due to custom manufacturing, patches and roll goods are non-returnable and non-exchangeable.
• Materials described are exclusively suitable for thermal transfer printing systems, as emphasized in multiple languages.
• Products comply with EN ISO 11612:2008, meeting protective clothing standards.

Contact Information

Contact details for THERMOTEX NAGEL GmbH and THERMOTEX EUROPE AG are provided for customer inquiries and order placement.

Summary

This document serves as a detailed technical and ordering guide for textile repair patches and marking tapes. It specifies available formats, material compositions, color options, printing compatibility, and processing parameters. The document stresses the importance of written orders and precise specification due to the custom-made nature of the products, which are non-returnable. Compliance with protective clothing standards and printing system compatibility are also highlighted.