TK24 V^'Disc Thermostat Operating Temperature Range (-45°C to + 200°C) This is a cyclic operating temperature sensitive device, which is intended to control the temperature between two particular values under normal operating conditions, automatically switching on or off the electrical circuit. This thermostat can be built to either open or close its electrical contacts as the temperature increases. Once the temperature of the bimetal disc has returned to the specified reset temperature, the contacts will automatically return to their original state. Besides its variety of standard configurations...

BASIC TECHNICAL DATA FOR TK24 (10 °C - 175 °C) Rated voltage, V, not more Rated current, A, at power coeff. 0,95, not more Rated current, A, at power coeff. 0,6, not more Number of automatic cycles, at rated current 16 A and power coeff. 0,95, not less than Number of automatic cycles, at rated current 10 A and power coeff. 0,95, not less than Operating temperature, 0C Tolerance of operating temperature, %, but not less than °C Reset temperature, lower than operating temperature, oC, on Transient resistance, O, not more Contact operating time, ms, not more Electric strength of insulation, V, not...

Wire standard length: 150 mm Wire information to be specified on the order form (type; cross-section; lengths; stripping) The only option for TK24 (-45-+10)

ROTATION OR FIXED CLIP ROTATION CLIP TUBE MOUNTING Screw parameters (MX, L) to be specified on the order form Screw parameters (MX, L) to be specified on the order form Screw parameters (MX, L) to be specified on the order form

Screw parameters (MX, L) to be specified on the order form WITH GROUNDING Table 1.3 (BODY and/or CASE) STEEL CASING PLASTIC BODY Only with lead wires Protection degree IP64 PLASTIC BODY CERAMIC BODY Only with lead wires and screw caps Protection degree IP64 Only with lead wires and screw caps Protection degree IP64 Only with lead wires Protection degree IP64 PLASTIC BODY CERAMIC BODY CERAMIC BODY PLASTIC BODY SILICONE CASING Only with cables Protection degree IP64

Table 1.4 (CONTACT TYPE AND CONTACT TRANSIENT RESISTANCE VALUE) *For wire terminals, lead wire parameters must be specified when placing an order: insulation type, cross-section area; ends type; lenght; etc. **For screw cap mountings, screw parameters must be specified when placing an order. ***Tolerance in % or °C, whichever numerical value is bigger.

TK24HT Operating Temperature Range (+200 C to +425 C) This is a cyclic operating temperature sensitive device, which is intended to control the temperature between two particular values under normal operating conditions, automatically switching off the electrical circuit. This thermostat is designed to operate in higher temperatures. This thermostat is available only with electrical contacts that open as the temperature increases. Once the temperature of the bimetal disc has returned to the specified reset temperature, the contacts will automatically return to their original state. Besides its...

BASIC TECHNICAL DATA Parameter Value Rated voltage, V, not more Rated current, A, at power coeff. 0,95, not more Rated current, A, at power coeff. 0,6, not more Number of automatic cycles, at rated current 10 A and power coeff. 0,95, not less than Tolerance of operating temperature, % Reset temperature, lower than operating temperature, oC, on Transient resistance, Cl, not more Contact operating time, ms, not more Electric strength of insulation, V, not less than Insulation resistance, MO, not less than Heating speed, K/min Degrees of protection provided by enclosure

MG 01 ROTATION OR FIXED CLIP MG 04 CLIP WITH ONE FIXING HOLE *For screw cap mountings, screw parameters must be specified when placing an order.

TK32 V^'Disc Temperature Limiter Operating Temperature Range (+300C to+2500C) This is a temperature sensitive device, which is intended to keep a temperature below one particular value during normal operating conditions, automatically switching off the electrical circuit. This device is not self-resetting and operates with manual reset option. It prevents overheating in variety of consumer, industrial and commercial products. This temperature limiter is available only with contacts that open as the temperature increases. The contacts may be reset by manually pushing on the reset button after...

BASIC TECHNICAL DATA FOR TK32 (30 °C - 170 °C) Parameter Value Rated voltage, V, not more Rated current, A, at power coeff. 0,95, not more Rated current, A, at power coeff. 0,6, not more Number of automatic cycles, at rated current 16 A and power coeff. 0,95, not less than Tolerance of temperature limiter operating temperature, %, but not less than oC Transient resistance. Cl, not more Contact operating time, ms, not more Electric strength of insulation, V, not less than Insulation resistance, MO, not less than Heating speed, K/min Degrees of protection provided by enclosure BASIC TECHNICAL DATA...

Wire standard length: 150 mm 14.5 Wire information to be specified on the order form (type; cross-section; lengths; stripping) Soldering balls

ROTATION OR FIXED CLIP ROTATION CLIP CLIP WITH ONE FIXING HOLE TUBE MOUNTING Screw parameters (MX, L) to be specified on the order form Screw parameters (MX, L) to be specified on the order form Screw parameters (MX, L) to be specified on the order form

PART ORDERING SYSTEM TK32 *For wire terminals, lead wire parameters must be specified when placing an order: insulation type, cross-section area; ends type; lenght; etc. **For screw cap mountings, screw parameters must be specified when placing an order. ***Tolerance in % or °C, whichever numerical value is bigger.

TK32OS (One Shot) 1/2nDisc Temperature LimiterOperating Temperature Range (+30 °C to+250°C) This is a temperature sensitive device, which is intended to keep a temperature below one particular value during normal operating conditions, automatically switching off the electrical circuit. This device is operating with one-shot action and has no reset option. This temperature limiter is available only with contacts that open as the temperature increases. With variety of standard and custom configurations it provides reliable one-shot over-temperature protection and meets the specific technical needs...