TL3 Basic Reference Thermometer
1Pages

{{requestButtons}}

Catalog excerpts

TL3 Basic Reference Thermometer - 1

Reference Thermometer for Field and Laboratory CTL3 The TL3 thermometer is an ergonomically advanced version of our proven TL1-A, which is a preferred temperature instrument used by hundreds of companies in the pipeline, pharmaceutical and food industries. The TL3 incorporates a larger display and an easier to hold shape with the same specifications for high accuracy and long term stability established by the TL1-A. The rugged enclosure is designed to withstand use in the field, factory or lab. Through numerous distributors equipped for calibration and repair, the TL3 can be supported in many locations throughout the world. A one year warranty, protective case and NIST traceable 4 point calibration report are included. Interface Features: 0.5" (1.3cm) character LCD Switchable units °C or °F Resolution 0.1 or 0.01 Low Battery & Fault Indication Continuous operation or Auto Off after 20 minutes. Stores and displays Average, Lowest & Highest readings. Arrows indicating increasing/decreasing temperature. Recommended Ambient Temperature range: 32°F to 112°F (0°C to 44°C) Construction: Stainless Steel RTD temperature sensor - 100Q Shock resistant Thin Film RTD - Standard 8"(20cm) or 12"(30cm) lengths - Standard 0.25"(6.35mm) diameter - Standard 0.188" (4.76mm) reduced tip Glass-Filled Nylon Enclosure with silicone buttons and a durable polyester graphics window. Nominal Body Dimensions: 5.0 x 1.7 x 0.85" (3 x 4.3 x 2.2cm) Nominal Weight: 150 grams Temperature: Accuracy +/-0.1 °F (0.06°C) -standard calibration 14°F to 320°F Standard 4 Point Calibration: 32°F(0°C) , 120°F(49°C), 199°F(93°C) & 300°F(149°C) Resolution: 0.01 Degrees Range: -40°F to 400°F (-40°C to 204°C) -Note: Standard Calibration does not provide full range accuracy Custom calibration points and ranges available. Temperature Time Constant: 6.5 seconds in circulated water bath (63.2% response to temperature change) Recommended Immersion Depth: 4" (11cm) Battery: 3V Lithium CR2032 coincell Over 100 hours service life at 70°F (21 °C) Operating Temperature Range -4°F to 130°F (-20°C to 54°C) Note: Battery may not provide adequate power if used outside operating range. On/Off Button Distillations, temperature baths, melting point tests, flash point tests, reference, thermowells, provers, temperature calibration for flow meters. Laboratory Petroleum Pipeline Pharmaceutical Food ThermoProbe Inc. 112-A Jetport Drive Pearl, MS 39208 USA Tel: +1 601.939.1831 Fax: +1 601.355.1831 www.thermoprobe.net JKK 7/14/201

Open the catalog to page 1

All ThermoProbe Inc catalogs and technical brochures