NEW PRODUCTS THE EFFECTIVE SENSOR MANUFACTURER FROM GERMANY

The radio fancoil controller in high-class design is used for individual temperature control in hotels, offices and ... The radio room comfort controller in highclass design is used for individual temperature control in living spaces, hotels and ... The fancoil room thermostat with cooling controller or control of 6-way valves has been designed for individual control of ... The fancoil room thermostat is designed for individual control of temperature in commercial, industrial and ... The leakage sensor with switch contacts and two signal LEDs is used to monitor containers, false floors, false...

The fancoil controller with radio receiver in high-quality design is used for individual temperature control and control of fancoil units in hotels, offices and living rooms. The device is designed for four- or two-pipe systems with changeover. Two configurable inputs can be used as sensor input, room occupancy or energy lock. In addition to wired continuous valve actuators (also 6-way valve) and a 0..10 V EC motor, sensors and actuators can also be controlled by radio. In addition, as an alternative to wired sensors, an external radio temperature sensor, radio motion detector, a radio temperature...

EASYSENS - RECEIVER GATEWAYS « Wireless EasySens® switch for controls of lighting and air-conditioning applications in rooms using key card activation. The self-powered wireless technology enables a flexible installation on glass or wall plaster via double-sided adhesive pads or screws. STC-KNX UP Bidirectional gateway between EasySens® wireless sensors and the EIB/KNX bus for mounting in a standard flush-mounted box. The device has 8 receive and transmit channels and 8 channels for logic and control functions that can be assigned with the functions switch, dimming, blinds up/down, presence,...

» ROOM OPERATING UNITS/CONTROLLER ROOM OPERATING UNITS ROOM OPERATING UNITS/CONTROLLER FANCOIL CONTROLLER « The flush-mounted room operating unit with interface for RS485 Modbus is used for setpoint adjustment and triggering of an ECO mode function for energy-saving. The central button is used as a rotary knob and push button. The setpoint can be changed as required by turning the button accordingly. The current status is visualized by LEDs. Pushing the button triggers the ECO or presence mode function. The device is designed for selected switch systems in the 55x55 frame. LCF02 The fancoil room...

TEMPERATURE ROOM SENSORS « » ROOM OPERATING UNITS/CONTROLLER FANCOIL CONTROLLERLCF02 BUS ^f^/ladbus The fancoil controller is designed for individual control of temperature in commercial, industrial and residential buildings. It provides two configurable, digital inputs for e.g. occupancy, window contact, dew-point contact or change-over. Additionally, it is equipped with an input for external (remote) temperature sensors and Modbus interface for configuration of controls parameters. With its flush mounted modern design, the device combines digital technology with a large display and additional...

» HUMIDITY ROOM SENSORS HUMIDITY ROOM SENSORS « FTP+ Room pendulum sensor for sectional measurement of relative humidity and temperature in large and high rooms (e.g. exhibition halls, gyms or similar). Alternatively to relative humidity, the output can be set to absolute humidity, enthalpy or dew point. The design allows for an optimal installation with precise measurements. Accuracy of the humidity sensor is 2%. FTB+ Wall-mounted recessed sensor measuring relative humidity and temperature for plastered flush-mounting boxes or installation in hollow walls with high-quality, inconspicuous stainless...

PRESSURE & VELOCITY GASES « » HUMIDITY CONDENSATION/LEAKAGE DPA+ Dual )friodbus “SBACne The leakage sensor with switch contacts and two signal LEDs is used to monitor containers, false floors, false ceilings or rooms for unwanted ingress of water and thus helps to prevent major water damages. The height-adjustable sensor contacts allow to select the height level of water the device should respond on. TECHNICAL DATA Measuring values Conductivity Output switch contact changeover contact, 24 V: max. 24 V / 1,0 A (resistive, floating) Power supply 15..24 V = (±10%) or 24 V ~ (±10%) SELV...

» PRESSURE & VELOCITY GASES AIR QUALITY ROOM SENSORS « Enclosure enclosure USE-L, PC, pure white, with removable cable entry Cable entry Flextherm M16 for wire 0=3..7 mm, 4xV: M20 for wire max. 0=8 mm incl. seal insert for double cable entry for wire max 0=6 mm, removable Connection electrical removable plug-in terminal, max. 2,5 mm2, BUS terminal: removable plug-in terminal, max. 1,5 mm2 Connection mechanical pressure connection male 0=5,0 mm / 0=6,3 mm, connection tube: PVC, soft Ambient condition -10..+50 °C, max. 85% rH short term condensation Mounting screw mounted onto...

AIR QUALITY ROOM SENSORS « WRF06 AQ active Room sensor CO2 + temperature (opt.) + relative humidity (opt.) - active 1x/2x/3x 0..10 V Item description Item No. WRF06 CO2 V Gira E2 pure white matt 702355 WRF06 CO2Temp VV Gira E2 pure white matt 702362 Room sensor VOC + temperature - active 2x 0..10 V AQ1 Item description Item No. € WRF06 VOC Temp VV Gira E2 pure white matt 702423 280,00 Room sensor CO2 + VOC + temperature (opt.) + relative humidity (opt.) - active 2x/4x 0..10 V AQ1 Item description Item No. € WRF06 CO2+VOC VV Gira E2 pure white matt 702409 334,00...

» AIR QUALITY OUTDOOR SENSORS AIR QUALITY OUTDOOR SENSORS « LA+ active Outdoor sensor CO2 - active 0..10 V | 4..20 mA USEapp Item No. € Outdoor sensor VOC - active 0..10 V | 4.. 20 mA AQ1 Item description USEapp Item No. € Air quality sensor for measuring CO2, mixed gas (VOC), temperature and humidity outdoors and in areas requiring high IP protection class (e.g. subway stations, tunnels, exhibition halls, cooling and greenhouses as well as in production halls and warehouses). If required, default values can be adjusted via Thermokon USEapp. For devices with CO2 and VOC, each output...