ThermoKey® Heat Exchange Solutions

Heat Exchange Solutions ThermoKey V-Tower Evaporative Panel System Dry Cooler INDUSTRIAL HIGHLIGHTS Vi % v-Tower NO AEROSOL Cooling system similar to the cooling tower one, yet with no aerosol set of problems HIGHER SPECIFIC CAPACITY Adiabatic system with evaporative panels to reach higher specific capacity compared to a traditional Dry Cooler COMPLETE CONTROL Optimisation and complete control of the adiabatic system SMART MODULARITY Smart modularity of the system to obtain maximum simplicity in use and reliability

Heat Exchange Solutions Heat Exchange Solutions OPERATING MODES OF THE ADIABATIC SYSTEM § Water Saving: increased specific capacity when using H2O - (H2O when engine at maximum). § Energy Saving: energy saving to help the fan (H20 immediately). ADIABATIC SYSTEM: HOW IT WORKS The physical principle is the latent heat of evaporation - when evaporating the water absorbs heat from the air entering in the heat exchanger and lowers its temperature. The adiabatic system applied to dry-coolers and large remote condensers or gas-coolers is activated in order to reduce the air inlet temperature and increase...

Heat Exchange Solutions Operation and strengths of V-Tower NO WATER TREATMENT NEEDED NO TREATMENT OF THE HEAT EXCHANGER HEAVY DUTY DESIGN The water used for the adiabatic system equipped with evaporative panel does not require specific treatments. No treatment of the heat exchanger is necessary because the EPS system does not generate aerosols in the air. The adiabatic EPS system has a strong structure and uses materials suitable to last even the most severe environmental conditions. REDUCED WATER AND ENERGY CONSUMPTION The system works using the minimum amount of water required for the adiabatic...

Heat Exchange Solutions Heat Exchange Solutions Technical features HIGHLY FUNCTIONAL EVAPORATIVE PANELS ■ No water treatment needed ■ High quality materials ■ Easily removable panels for maintenance and storage, available in two solutions: vertical (JUMBO and SUPER JUMBO) for a better water distribution and sloping (SUPER JUMBO) for the systems where it is necessary to save space, allowing better air recovery as serial large installations. ■ No aerosol ■ Legionella free ■ Dry cooled coil ■ No deposits or corrosion ■ Reduced disposal costs NO WASTE THANKS TO CONTROL ■ Reduced water consumption...

ThermoKey Heat Exchange Solutions Comparison V-TOWER COOLING TOWER DRY COOLER WATER TREATMENT NOT NECESSARY NECESSARY / DIRECT ENERGY CONSUMPTION LOW LOW HIGH ENVIROMENTAL INFLUENCE LOW HIGH LOW FUNCTIONING HOUR CONTINUOUS CONTINUOUS CONTINUOUS MAINTENANCE COSTS LOW HIGH / FOOTPRINT LOW MEDIUM HIGH HIGH AMBIENT TEMPERATURE ADAPT ADAPT NOT ADAPT Industrial vertical V-Tower vs sloping V-Tower ◄-► DISTANCE BETWEEN THE UNITS The sloping V-Tower solution saves space when there are more than one unit next to one another without reducing the operating efficiency. Heat Exchange Solutions Construction...

Heat Exchange Solutions Hygienic certification FANMOTORS WITH AXITOP On request the fan motors can be equipped with diffusers that allow the reduction of the sound level or the increase of efficiency and performance and the increase of the air throw. To guarantee the highest quality and safety of its products, ThermoKey has had its EPS system (Adiabatic Evaporative Panel System) certified by an independent institution. The hygienic certificate refers to VDI 2047-2 which takes into consideration the requirements set by the law and by industry standards in the main countries of use of the specific...

Heat Exchange Solutions

ThermoKey® Heat Exchange Solutions ThermoKey Spa via dell'Industria, 1 - 33061 Rivarotta di Rivignano Teor (UD) - Italy