isteam-steam-coils
6Pages

Thermofin ISTEAM Steam coil heat exchangers Manufacturing expertise at work For sustainable exchanges ...

Aéroréfrigérant ISTEAM : Custom Built Steam Coils The ISTEAM exchanger was the first heat exchanger product designed by Thermofin. Over the years, its evolving design has benefited from Thermofin’s significant experience with thousands of installed units. The ISTEAM coil’s purpose is to transfer heat from steam. Steam, sometimes referred to as a “wild beast” by experienced boiler operators, can be unpredictable if all aspects of the heat exchanger, either thermal or mechanical, are not controlled properly. Accordingly, Thermofin is pleased to offer a wide range of specially designed steam...

This steam coil was specifically designed for air temperatures that are below freezing, to prevent the costly consequences of freezing condensate. The concept is to insert an open-ended shorter distribution tube within an outer fin tube thus allowing the condensate that is flowing in the annular clearance to be kept warm by the steam condensing in the distribution tube. The tubes are inclined in order to promote the condensate flow by gravity. Consequently, the type VC steam coils always have both their inlet and outlet connections at the same end of the coil. Installation may be horizontal...

Excellence in every aspect Frequently used in industrial processes that put equipment such as heat exchangers to the test, Thermofin’s ISTEAM coils are designed to last. In fact, our famous extruded aluminum finned tubes render our steam coil heat exchangers extremely resistant and capable of attaining superior heat transfer duties. The fin tubes can even be cleaned with the use of high-pressure water jets, without damaging the fins! Fin tube section view Through its mastery of every aspect of the design and fabrication of extruded aluminium finned tubes, Thermofin has achieved the...

Options To better suit your exacting needs, Thermofin offers an array of options such as: Air-tight construction: This option is usually needed when the airside pressure is higher than the ambient conditions of the site. Drawer type: The design of a casing that incorporates the concept of a drawer that contains the exchanger simplifies maintenance and replacement of the unit. No need to disassemble the air ducts to remove the steam coil heat exchanger! Exterior surface protection: special coatings (‘‘Heresite’’, hot dip galvanizing, special paint, etc.) that help protect the fins and/or the...

The heat exchange specialist Since 1993, Thermofin has designed, manufactured and marketed a large range of high quality exchangers for industrial processes. Over the years, Thermofin has become one of North America’s leading name in thermal exchange. Through its expertise and its dedicated workforce, Thermofin will always offer you the right exchanger: the one for sustainable exchanges ... EOLIA: Industrial air cooled heat exchanger ITEX : Gasketed plate heat exchangers ELECTRA: Generator and motor coolers CALEOS : Shell & Tube heat exchanger 47, Marie-Victorin Blvd. Candiac Quebec, Canada...