EXEL Brazed-plate heat exchangers
7Pages

Brazed-plate heat exchangers all the expertise of a manufacturer For sustainable exchanges ...

EXCELLENCE IN DETAIL EXEL : innovative heat exchanger An EXEL heat exchanger is made up of copper sheets stacked with stamped stainless steel plates. Once fitted with its connections, it is placed in a high-temperature brazing furnace, where the copper melts, ensuring a tight seal and mechanical strength. The end result is a completely functional packaged unit. The slim design means that less refrigerant fluid is needed. The counterflow of fluids makes it possible to reach temperature differences to the degree. Efficiency The distinctive pattern was created using Thermofin's experience in...

MULTIPLE USES EXEL heat exchangers can be used for any function in the refrigeration cycle and for many applications, from heating to industrial processes. ->Air heater ndustrial processes Cooling/heating of oil (temperature control] Hydraulic power packs

The EXEL range of brazed-plate heat exchangers is available in 6 sizes and has been developed to meet your needs as exactly as possible. Thermofin uses its expertise in thermal engineering to size units as closely to requirements as possible. Because heat exchange efficiency depends on the size of an exchanger, EXEL exchangers are ultraslim. The care taken in the design and manufacturing of each unit and the testing programmes used guarantee reliable equipment. Specifications Model Our inventory and development policy is based entirely on the needs of builders and fitters. Not only are EXEL...

VARIANTS & OPTIONS Thermofin has developed a connection management programme so that you always benefit from the best cost/lead time trade-off. Your adviser will guide you through all the possibile connections to find the right one for your unit. And if the one you need does not already exist, we'll make it! Threaded NPT couplings with seal in thread Rotating flanges Braze-welding couplings for refrigerant pipes Threaded gas couplings with O-ring Hex tapped couplings for flexible connections Victaulic couplings Cold insulation

Controlled manufacturing Our two manufacturing lines are certified by quality and cleanliness standards that are in line with our aim for flexibility and flawless reliability. Heat exchangers are highly technical components. The core of our machines, they are where fluids and gases meet. The materials used are defined in specifications whose development required many years of experience (optimum thicknesses, metallurgical composition, ductility, etc.). The presses are set for total reproducibility while maintaining a high rate. Inspections at regular intervals of pressed plates are...

The heat exchange specialist Since 1993, Thermofin has designed, manufactured and marketed a large range of high quality exchangers for industrial processes. Over the years, Thermofin has become one of North America’s leading name in thermal exchange. Through its expertise and its dedicated workforce, Thermofin will always offer you the right exchanger: the one for sustainable exchanges ... Gasketed plate heat exchangers Extruded aluminum finned tubes Industrial heat exchanger Shell & Tube heat exchanger 47, Marie-Victorin Blvd. Candiac Quebec, Canada J5R 1B6 Tel.: (450) 444-4405 Fax: (450)...