Catalogs >
Thermal Detection >
TCEG Thermocouple Entry Gland

TCEG Thermocouple Entry Gland
4Pages

Catalog excerpts

Validation Thermocouple Entry Gland for Pharmaceutical Autoclaves Description: Conventional methods of chamber entry for validation thermocouples allow only limited numbers of thermocouples to be used. They are relatively time consuming in their application and frequently prone to unacceptable leakage. The TCEG/1 addresses both of these problems by providing individual slots allowing for 18 separate thermocouples to sealed with a rapid locking and securing mechanism. The TCEG/2 uses a three part sealant arrangement which allows up to 36 individual thermocouples to be sealed. By using two TCEG’s and a Tee or Y tube extension with tri-clover clamps, up to 72 thermocouples can be sealed. In addition, tri-clover reducers (TCR) or adaptors (PTA) can be used to connect the TCEG to a range of different autoclave process connections. Specification: BODY: machined from 316L stainless steel, round bar stock with bore finished to 0.5 Ra (25µ inch). GLAND BONNET: cap in CZ112 marine brass and compression nose in CZ121 brass, both machined from round bar stock, with spring loaded quick release locking mechanism in 316L stainless steel. SEALANTS: medical grade silicone and in accordance with FDA 21 CFR 177-2600. To USP Class VI on application. PROCESS CONNECTION from 1” through to 3” Tri-clover flange as standard or with 1” screwed BSPT or NPT connection. THERMOCOUPLE SLOT Datasheet : 022 Thermal Detection Limited Unit 6, Primrose Hill Industrial Estate Orde Wingate Way Stockton-on-Tees, England, TS19 0GA Fax : +44 (0) 1642 618307 Tel : +44 (0) 1642 602878 Email: sales@thermal-detection.com Web: www.thermal-detection.com © Thermal Detection L

Open the catalog to page 1

Validation Thermocouple Entry Gland for Pharmaceutical Autoclaves Mounting Options for TCEG: The standard TCEG entry gland is supplied with a Tri-clover flange in 316 grade stainless steel and there are four optional flange sizes available, from 1” up to 3”. It should be remembered that when selecting the flange size, the nominal flange size is not the same as the distance across the flange diameter, as shown under dimension ‘C’. When needing to connect to an existing Tri-clover flange that is larger than 3”, a reducing adapter can be supplied. W Nominal Size Where there is only the...

Open the catalog to page 2

Validation Thermocouple Entry Gland for Pharmaceutical Autoclaves Validation Accessories: Pre-cut Validation Thermocouples Validation Thermocouple Wires in a Loom Clamps, Tri-clover blanks, gaskets Validation Clamp Ampoule Holders Type T Thermocouple Wire Datasheet : 022 Thermal Detection Limited Unit 6, Primrose Hill Industrial Estate Orde Wingate Way Stockton-on-Tees, England, TS19 0GA Fax : +44 (0) 1642 618307 Tel : +44 (0) 1642 602878 Email: sales@thermal-detection.com Web: www.thermal-detection.com © Thermal Detection Ltd 2016

Open the catalog to page 3

Validation Products Enquiry Form Please download PDF and fill in the boxes. Use 'Additional Information' for non standard requests. Return form to sales@thermal-detection.com or fax to +44 1642 618307 Organisation: Country Thermocouple Entry Gland (TCEG) TCEG/1 (18t/c) Select Process Connection Spare Sealant Sets RS-TGEG/1 qty? please choose.. 1-1.5" Tri-clover 2" Tri-clover 2.5" Tri-clover 3.0" Tri-clover 1" BSPT Thread Adaptor 1" NPT Thread Adaptor Spare Sealant Sets RS-TCEG/2 qty? Validation Thermocouples (VTFP) Select Wire Format please choose... 1/0.3mm PFA Extruded 1/0.5mm PFA...

Open the catalog to page 4

TCEG Thermocouple Entry Gland 4Pages

Catalog excerpts

All Thermal Detection catalogs and technical brochures

TCEG Thermocouple Entry Gland
4Pages