Pharmaceutical Refrigerator, Freezer and Cold Storage Probe Product Code: SD051 / SD051(EP) For continuous monitoring of sub zero temperatures • • SD051 for service to –25°C SD051 (EP) for service to –80°C, can be used at cryogenic temperatures. Specification: SHEATH DIMENSIONS Diameter : Metric: 3.0mm, 4.0mm, 4.5mm, 5.0mm, 6.0mm, 8.0mm Imperial: ⅛”, 3/16“, ¼” Length: 25mm to as required Thin film single or duplex (3 or 4 wire) PT100 or PT1000 Class B or A to BS EN 60751:2008. DETECTOR TOLERANCE Thin film tolerance range: Class B –50°C to +25°C Class A –30°C to +25°C Note tolerance below must be determined by calibration Silver plated copper conductors with PFA insulation and a PFA outer jacket with a minimum overall length of 1000mm. PROBE OPERATING RANGE SD051: -25°C to +100°C SD051(EP): -80°C to +25°C (will withstand -196°C) Note tolerance limits PR 5332 transmitter recommended for high accuracy. Enclosures available. THERMOCOUPLE OPTION DETECTOR Single, duplex or triplex element, type ‘T’ (Cu/Con) to BS EN 60584-1:2013. DETECTOR TOLERANCE Class 1 tolerance range - 40°C to +100°C Note tolerance below must be determined by calibration Silver plated type ‘T’ conductors with PFA insulation and a PFA outer jacket, Class 1 material and IEC colours. Minimum overall length of 1000mm. PROBE OPERATING RANGE -80°C to +25°C (will withstand –196°C) Note tolerance limits PR 5334 transmitter recommended for high accuracy. Enclosures available. OPTIONAL EXTRAS Datasheet : 002 Thermal Detection Limited Unit 6, Primrose Hill Industrial Estate Orde Wingate Way Stockton-on-Tees, England, TS19 0GA Compression fittings with threads or tri-clovers Material certs for wetted parts UKAS calibration at –196°C and from –100°C to +100°C ADIF statement 0.8 RA surface finish on wetted parts Electropolishing for superior surface finish Fax : +44 (0) 1642 618307 Tel : +44 (0) 1642 602878 Em

SD051 Fridge/Freezer Probe Product Enquiry Form Please download PDF and fill in the boxes. Return form to [email protected] or fax to +44 1642 618307 Organisation: Country Section 1 - unit dimensions (in mm) Section 2 - Sensor Configuration Sensor Number Thermocouple Only Hot Junction Single Duplex Triplex Section 3 - Optional Features (in mm) Reduced Probe Tip Section 4 - Application Details Number of probes Additional information Min/Max temperature Industry Type Thermal Detection Limited Unit 6, Orde Wingate Way Primrose Hill Industrial Estate Stockton-on-Tees TS19 0GA, UK Fax :...