Plain Stem Thermocouple Product Code: PSTC Description: A simple plain stem thermocouple suitable for a wide range of applications. Fabricated from stock lengths of stainless steel seamless tube or pipe with the tip sealed by TIG welding. These assemblies are produced in the thermocouple formats below (see data sheet 061 for plain stem PT100) Specification: SHEATH MATERIAL 316 / 316L as standard Other materials available. SHEATH DIMENSIONS Diameter : Metric: 3.0mm, 4.0mm, 4.5mm, 5.0mm, 6.0mm, 8.0mm Imperial: ⅛”, 3/16“, ¼”, ½” Length: 50mm to as required Single, duplex or triplex elements (dependant on sheath OD) THERMOCOUPLE SENSOR Types: T (Cu/Con), E (NiCr/Con), J (Fe/Con) , K (NiCr/ NiAl) or N (Nicrosil/Nisil) to BS EN 60584-1:2013. Temperature Range: Standard range -50 to +250°C (-58 to+480°F), Contact us for higher service temperatures Compression fittings (MSC) Conax soft seal glands Standard (SMC) and mini connectors (MMC) Hand held instruments Datasheet : 060 Thermal Detection Limited Unit 6, Primrose Hill Industrial Estate Orde Wingate Way Stockton-on-Tees, England, TS19 0GA Fax : +44 (0) 1642 618307 Tel : +44 (0) 1642 602878 Email: [email protected] Web: www.thermal-detection.com © Thermal Detect

Plain Stem Thermocouple Mineral Insulated Sensors Conax Soft Sealant Glands Compression Fittings Thermocouple Cable Thermal Detection Limited Unit 6, Primrose Hill Industrial Estate Orde Wingate Way Stockton-on-Tees, England, TS19 0GA Fax : +44 (0) 1642 618307 Tel : +44 (0) 1642 602878 Email: [email protected] Web: www.thermal-detection.com © Thermal Detection Ltd 2016