Hygienic/Sanitary Process Pocket and Insert Product Code: MDPH A convenient arrangement of a pocket with hygienic tri-clover flange and removable temperature insert for Food, Dairy and Pharmaceutical processes and service plant • • • • Consists of a 316L thermowell / pocket with tri-clover flange, for easy and secure connection with standard clamps and gaskets Spring loaded insert specified with either PT100, PT1000 or thermocouple type T sensors. Terminal head in FDA Polypropylene or 316 stainless steel Can be specified with a 4-20mA transmitter Specification: THERMOWELL MATERIAL THERMOWELL DIMENSIONS TRI-CLOVER PROCESS CONNECTION REMOVABLE SPRING LOADED INSERT WITH RTD SENSOR 316 stainless steel. Diameter : Metric: 6.0mm to 15mm Imperial: ¼” to ½” NB (21.3mm) immersion Length below tri-clover: 50mm min to as required Extension above tri-clover: Standard 50mm Imperial: 0.5-0.75”, 1-1.5”, 2.0”, 2.5” Metric: DN25, DN50 Vacuum flange or other flanges can be specified PT100 / PT1000 Single or duplex with 2, 3 or 4 wire connection. Triplex with 2 wire connection Tolerance: PT100: Class A, AA to BS EN 60751:2008 or 1/10 DIN PT1000:Class A Temperature Range: -50 to +250°C REMOVABLE SPRING LOADED INSERT WITH THERMOCOUPLE SENSOR Single, duplex or triplex elements Type: T to BS EN 60584-1:2013. Temperature Range: -50 to +250°C TERMINAL HEAD Screw cap, retention chain and M20 cable entry, environmental rating to IP67. In FDA approved Polypropylene or 316 stainless steel Complete with terminal block or transmitter OPTIONAL EXTRAS • • Datasheet : 064 Thermal Detection Limited Unit 6, Primrose Hill Industrial Estate Orde Wingate Way Stockton-on-Tees, England, TS19 0GA Transmitter for 4-20mA output to suit RTD or Thermocouple PR 5332 recommended for high accuracy PT100/PT1000 measurements for detectors with 4 wires Material certs for wetted parts UKAS calibration ADIF statement 0.8 RA surface finish on wetted parts Electropolishing for superior surface finish Fax : +44 (0) 1642 618307 Tel : +44 (0) 1642 602878 Email: [email protected] Web: www.thermal-detecti

Hygienic Sanitary Pharmaceutical Process Pocket / Thermowell and Insert Product Enquiry Form Please download PDF and fill in the boxes. Use 'Additional Information' for non standard requests. Return form to [email protected] or fax to +44 1642 618307 Organisation: Country Section 1 - unit dimensions in mm, select options required Pocket imersion Length below flange in mm Pocket Diameter Section 2 - Insert Sensor Configuration Sensor Number Single Duplex Triplex Terminal Head Material FDA Polypropylene Stainless Steel Termination Options Optional Extras 3.1 Material Certs for wetted...