Pharmaceutical Process Pocket and Temperature Insert Product Code: MDP A convenient arrangement of a pocket and separate temperature insert, for Food, Dairy and Pharmaceutical processes and service plant • • • • • Spring loaded insert specified with either PT100, PT1000 or thermocouple type T sensors. Inserts can be purchased separately. Terminal head in FDA Polypropylene or 316 stainless steel Wide range of process connection options. Can be specified with a 4-20mA transmitter Specification: THERMOWELL MATERIAL THERMOWELL DIMENSIONS Diameter : Metric: 6.0mm to 15mm Imperial: ¼” to ½” NB (21.3mm) Length: 50mm to as required PROCESS CONNECTION MDP: plain sheath MDS: Screwed BSPT/BSPP/NPT/Metric any size. MDF: Flanged, any size REMOVABLE SPRING LOADED INSERT WITH RTD SENSOR PT100 / PT1000 Single or duplex with 2, 3 or 4 wire connection. Triplex with 2 wire connection Tolerance: PT100: Class A, AA to BS EN 60751:2008 or 1/10 DIN PT1000:Class A Temperature Range: -50 to +250°C REMOVABLE SPRING LOADED INSERT WITH THERMOCOUPLE SENSOR Single, duplex or triplex elements Type: T to BS EN 60584-1:2013. Temperature Range: -50 to +250°C TERMINAL HEAD Screw cap, retention chain and M20 cable entry, environmental rating to IP67. In FDA approved Polypropylene or 316 stainless steel Complete with terminal block or transmitter OPTIONAL EXTRAS • • Datasheet : 050 Thermal Detection Limited Unit 6, Primrose Hill Industrial Estate Orde Wingate Way Stockton-on-Tees, England, TS19 0GA Transmitter for 4-20mA output to suit RTD or Thermocouple PR 5332 recommended for high accuracy PT100/PT1000 measurements for detectors with 4 wires Material certs for wetted parts UKAS calibration ADIF statement 0.8 RA surface finish on wetted parts Electropolishing for superior surface finish

Pharmaceutical Process Pocket / Thermowell and Insert Product Enquiry Form Please download PDF and fill in the boxes. Use 'Additional Information' for non standard requests. Return form to [email protected] or fax to +44 1642 618307 Organisation: Country Section 1 - unit dimensions in mm, select options required Pocket Diameter Pocket imersion Length in mm (if screw or flanged connection specified, this is the length below screw or flange) Section 2 - Insert Sensor Configuration Section 3 Process Connections Adjustable Compression Fitting Single Duplex Triplex BSPT BSPP NPT METRIC FDA...